Rubbish. GU10 is a type of base GU10 lamps are usually 240v, but can be 120v, 12v or 24v.
MR16 is the size of the lamps multifaceted reflector. (16/8"). LEDs don't usually have a multifaceted reflector.
The supply company will need to replace the seals on the meter.
As it is a rented flat was he even allowed to drill holes in the wall anywhere? I guess the landlord is not going to be happy.
Singapore uses the same systems as the UK. That 15 amp round pin socket was way overloaded at 7200 watts (perhaps you never used all the induction hob at once) but doesn't seem to have come to any harm. So re use it for the new hob.
These are clearly 2 phase induction hobs wired for single...
It is nothing to do with the compressors capacitor. It is the starting current of the motor in the compressor that is causing the trip. A stationary motor has a big inrush current at start up.
So a bank of capacitors won't help.
Possibly a series resistor to limit the start current may help...
If the new socket is near the CU. Remove one of the legs of the ring from the CU MCB and put it in your new socket. Run a short length of 2.5 T & E from you new socket back to the CU MCB. Thus the new socket becomes part of the ring.
I hope you asked for the fitting fee back.
That board looks like a Wickes one. Don't know if they still do that model.
By the way manufacturers instructions are guidance only and don't have to be followed if they are wrong. It appears they are wrong in this case.
NEVER use those things. They cause serious interference to other users of the RF spectrum, possibly including air traffic control.
https://www.ofcom.org.uk/research-and-data/technology/general/emerging-tech/plt-interference
https://www.ofcom.org.uk/__data/assets/pdf_file/0024/35907/pltreport.pdf
Your link:
The standard voltage of a home electrical outlet in the United States is 120 volts, although the actual voltage supplied may be as low as 110 volts, due to line conditions.
plus or minus 5% should be added. i.e.114 to 126v. 110 volts is out of tolerance.
Of course it is possible to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc