Never underestimate the reluctance to learn....
In one week,i met one gentleman who gave it his best shot,in convincing me the world was flat.....and a lady who was certain,the vaccines had micro-chips,in them.
I remain sceptical ?
The point SparkyChic made,regarding seat airbags,is important - they can injure and worse.
Usually they are connected independently,with unique looking,coloured connectors.....you need to first identify,and remove these.
If the single supply fuse,is 30 amps,you just need one in the supply...
Cracking piece of kit.....i've spent me tool bunce,this week on a hollow jack,or would be tempted ?
No end of benefits,to having invisible,extendable leads ? cannot imagine you'll struggle shifting it....
To be honest,the EV market,in terms of charge point fitment,will sooner or later,be determined by capacity and infrastructure,and not grants.
.....with air and ground source,heat recovery,UFH,power showers,and those two,new Tesla's at No.42.....gonna be getting closer to all the neighbours,so...
Hi,have you confirmed they have the correct MPN number? They will have to go with the meter reading on the device itself....smart...my seating muscle...?
I know the modern wireless stuff,negates some of the hard wiring,but i do remember one installation,which the various contractors had vanished,and it required a five core,where the 3c+e was.....
It was high-end,and mostly finished,and necessitated some pretty daring,fracking-type drilling,to...
Noticed a news item,regarding a fatality,involving a lift engineer,at Oldham Hospital.
Just to prove my mention of events which can lead to full investigations.....very sad,and my thoughts are with the family,of a fellow engineer,who went to work and did not come home.
Hi,have you been specified the full details off all the intended system?
This is what will determine the control and linking system,wiring wise.
If the full layout is to be supplied and fitted,it must be to a known or formatted control method,or there is the chance you will fall foul of having...
Hi,the fact you are somewhat out of our area of regular work? restricts a definitive answer....but the main two points to consider,are firstly,you would need to guarantee separation between your main supply and your generator,for obvious safety reasons.
Secondly,you would need to ensure that any...
Your park pin 3,would only need a fused,ignition feed,usually the wiper feed fuse,to self park.
The park feed powers the motor only until it is in park position,and then it stops unless or until another feed is switched.
The intermittent,only requires a pulse,to enable one wipe cycle,powered...
Hi,your first point of call,is your landlord and not a forum. I trust you will be as open and descriptive,in your explanation to the landlord or his spark....
Hi,have you connected your LED feed wires,to that capless lamp's receptacles?
If you have gone from connections in the lamp unit,you may not have the correct 12v and ground.
Check for polarity and such,with a test lamp.
Some of those interior light units,will have live,switched live,and a...
With respect,you could not say that with certainty,without seeing the system,the OP has.
It could be a right old mix-n-match? i have seen more than a few combi set-ups,with strange overide switching AND stored hot water.
Hi,thanks for reply,it may be easier to advise,if you could give us what you anticipate to be,the time scale,you are setting yourself,to be actively trading,as a spark.
This would allow a realistic planning,of required skills and qualifications.
There are a host of practical skills,you will...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc