When you say tripped what type of device was it,mcb,rcbo,Arc Fault Detection Device or (RCD) Residual Current Device a picture of your consumer unit indicating which device tripped would be handy
I cant believe the panels are 12 volt 1 KW that would be 83 amps per panel, i suspect some chinese figure manipulation is going on here.
In any case you cant connect it in any way shape or form to an existing installation.this can only ever be a stand alone system maybe in combination with some...
This is why we conduct eicrs ,i wonder if i should inform the manufacturer , it seems unlikely the installer would alter all the pre wired connections but you never know i guess.
During an eicr i found that all of the lockable sockets had reverse polarity , presumably from the manufacturer .
Of course this also questions the installation electrician and testing or lack thereof .
Has anyone else encountered this ?
Its AC after the inverter so there is no positive, (RCD) Residual Current Device and rcbo dont need an earth to work,these should never be connected to your consumer unit in any way.
As stated before they wont be in phase and there is a chance that in a power cut it will backfeed the grid ,this...
been a while since i wired these but a start button usually bridges the hold on contacts and the stop button in series with the coil, you would need more than 2 wires
Is it not just telling you there is no neutral connection present ?
There are probably voltage dividers internally , my kewtech generally reads about half the supply voltage if the neutral or cpc is not connected
The sensitivity of the microwave sensor can usually be adjusted, most residents like the feature as it puts the lights on before they open the door,and saves power .
Im not sure it may not be an official schneider label ,with the other problems i found here like a cpc used as a switch live. Probably not the best installler
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc