Search results | Page 7

Search results

  1. L

    Distribution board question

    hi guys Question for the knowledgeable on here, I went to look at a possible board change last night after the couple had experienced the ring final circuit going down when the fuse wire burnt out due to s faulty socket outlet had burnt out The socket face had been replaced by the customers...
  2. B10B0654-C1A8-4FB1-8F4A-7EBB4F4C462C.jpeg

    B10B0654-C1A8-4FB1-8F4A-7EBB4F4C462C.jpeg

    • leebut
    • Media item
    • Comments: 0
    • Category: Electrical Videos
  3. L

    Advise need for fans

    The latest update on this fan requirements is, the room is approximately five metres long by three metres wide and two and a half metres high there’s going to be an 150mm ducting through the outside wall direct to open air on both the draw and extraction sides, the customer has asked for a...
  4. L

    Advise need for fans

    The kitchen has a fire door with a spring closer so there’s little chance the door could be blown open with the fan The plan was to be a sleave though the exterior wall on one wall with the drawing fan and sleeve through the other exterior wall (90 degree to the draw fan wall) with the...
  5. L

    Advise need for fans

    The kitchen has a fire door with a spring closer so there’s little chance the door could be blown open with the fan
  6. L

    Advise need for fans

    I was looking for someone’s practical advise on the fan to draw in fresh air to recycle, I’ve been onto my electrical wholesaler who’s been onto their manufacturer but no real help
  7. L

    Advise need for fans

    hello guys I’m after some advice please I’ve been asked to carry out some work in a children’s nursery, the scenario is as follows:- The nursery has a kitchen which is located in a cellar (which has no window) of a large detached property, they are having a revamp of the kitchen over...
  8. L

    For Sale Martindale PD690 proving unit

    Hi Guys having a bit of a clear out and discovered I've got two of these so one is up for grabs its still boxed and is in excellent condition virtually unmarked looking for £45 posted cheers Lee
  9. L

    For Sale Ansell Orbio360 retro reducing rings

    Hello Guys I've ended up with seven Ansell Orbio360 reducing/convertor rings to reduce large downlighter opening so you can fit the orbit360 led downlighter into them they're polished chrome they would more than like fit any other downlighter with the same size bezel as orbio looking for...
  10. L

    Best place to buy certificates

    I've started using icertifi on both iPad and iPhone its really good software very professional when printed or emailed and you have copy with you at all times on the same devise lee
  11. L

    RCD"s to existing lighting circuits in a children's nursery

    The other three rooms that need rewiring I'm putting in a price for that work next week was simpler to deal with the rooms that are being used now and to let the original contractor back to at least rectify their issues that need sorting, but after speaking to the spark on Friday he doesn't want...
  12. L

    RCD"s to existing lighting circuits in a children's nursery

    Hi Darkwood I've checked the terminations and condition of the MICC in some other parts of the building they seem good, it just where this cowboys being having a play it seems to have messed up, there is one other serious problem in the building, the concrete flat roof that had been renovated...
  13. L

    RCD"s to existing lighting circuits in a children's nursery

    Hello All thanks for the replies regarding this installation, I removed all the connection to the MICC cables from both the rooms affected plus three other rooms all connected on the same circuit from the lighting distribution board, I've basically rewired the two main rooms with a new 1.5mm...
  14. L

    RCD"s to existing lighting circuits in a children's nursery

    Hi Guys can anyone help out here, I've just been to look at a lighting fault in a children's nursery which I've now sorted but my question to you guys is:- the building which was originally a NHS training centre that was renovated and converted 18 months ago by a "reputable builder" into a...
  15. L

    For Sale MCB and RCd selection of 100

    Hi Guys heres the list i have to clear Vynckier Type 2 mcb Bs3871 pt1 4 x 32 amp 2 x 16amp 2 x 6amp Square D...
  16. L

    For Sale MCB and RCd selection of 100

    Hi Guys clearing out the lock up due to a house move
  17. L

    Megger MFT1553 unusual readings while testing rcbo's

    The tester was set at 30ma when the tests were carried out and on both 1 and 5 times non of the rcbo's tripped, the tester was giving the same results when the old batteries were installed (10.5volts) and when the new ones (12.4volts) also didn't trip when testing at the CU and at a socket using...
  18. L

    Best RCBO CU?

    Daves away between the 10th and 13th June
  19. L

    Megger MFT1553 unusual readings while testing rcbo's

    Hello mark f Thanks for the message regarding sending my tester back for checking its a big mystery to me Lee
  20. L

    Best RCBO CU?

    ive known dave for many years he used to be my field officer through Napit

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top