Sorry for the slow reply to everyone. Been out for my daughters birthday. To answer some of the questions the DNO is due to come to upgrade my main fuse to 100A (extension project including an induction hob) so the tails to the CU need upgrading 1st. Did diversity calcs and I'm struggling to get...
I need to upgrade my meter tails to 25mm. The existing tails pass along under the pebble dash in plastic conduit (which would be too small), then apparently at an angle through the porch structure (unprotected) then turn sideways into a void & up the void to CU.
I have seen other posts where...
I currently have a 10mm T&E SWA cable (which passes through my garage) serving a small CU in my workshop at the bottom of my garden (200ft). The garage is currently connected to a FCU on the downstairs ring, but I would like to T off the SWA and add another consumer unit in the garage.
First...
I did quite a bit of research into this at one stage and it seems Beko are the only manufacturer who's Freezers & Fridge Freezers are designed to work in a Garage.
I "recently" contacted my DNO to have an isolator switch fitted beside my meter (my consumer unit needs changing and I didn't want to pull the fuse). I was told I needed to contact Scottish Power who charged me £85 but failed to turn up for the appointment, resulting in me having to contact them...
Hi,
I have recently completed my 17th Edition, Part P & L2 Inspection & Testing. Also IT experience. Have own tools & vehicle and looking for Domestic work as an Electrician's Mate.
Based just outside the M25 in Brentwood,
Robin
Thanks for the suggestions, l didn't realise fan isolator switches were available that incorporated a fuse.
Vent-Axia seem to have gone quiet since I flagged the shared neutrals point with them. As it turns out I have actually got the newer version of the fan as per the instructions...
Other people have mentioned the same thought in earlier discussions so l queried the point with Vent-Axia. Their reply was "I'm afraid the fused spur is a requirement and is there to protect the installation".
Others have also pointed out that we have to follow the manufacturers instructions to...
Interesting! The diagrams are completely different to the copy of the installation instructions l downloaded about a week ago for the same model fans, which show the fuse for both basic and timer models. The stock reference Nos have also changed (but not the models). There must have been a...
I am in the process of fitting an in-line extractor fan (ACM125T) that requires a 3A fuse, for a utility room. Vent-Axia have advised That I do need a fused spur, from either the lighting circuit or the ring main circuit (as well as a fan isolator switch).
They also said "the switched live does...
Maybe sticking to domestic work would help avoid exposure to Asbestos and I guess the worst of arc flash too. Knees & back - is that down to working in confined spaces and lots of kneeling? The latter could probably be mitigated with the right gear.
Hi all, I'm based in Essex, sure I did put that info up somewhere. I decided to change direction for reasons other than money.
To start with I was made redundant (job went to Russia rather than India) & because what I had been doing in a recent years at a large company was quite...
Having worked in the IT industry, I'm now looking to convert to a domestic Electrician. I have completed a basic electricians course and did my 17th Edition recently, but realise I need practical on the job experience as an Electricians Mate.
I have been using a screwdriver since I was about 5...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc