Search results | Page 2

Search results

  1. R

    6mm to 2.5mm for sockets

    Yeah I know what your saying. Did one like that recently. Just trying to keep costs down. There isn't any outside lights etc so hopefully not much that can fill with water at the summerhouse.
  2. R

    6mm to 2.5mm for sockets

    Yes I'm using swa
  3. R

    6mm to 2.5mm for sockets

    Yeah that was the 20A option. I think that's what I'll do as it will provide a bigger supply
  4. R

    6mm to 2.5mm for sockets

    Yes I was going to put a spur in for the lights in the summerhouse. It's about 60 metres. You never know what people will plug in so was trying to give as much power but keep costs down
  5. R

    6mm to 2.5mm for sockets

    Hi I've got a job that i've been asked to quote for and i'm struggling with how to do it the best way. It's a summerhouse and the customer only wants a couple of double sockets and a light in it. My issue is that it's a fair distance from the house where the supply will be taken from. I've...
  6. R

    100ma/30ma rcd for hot tub

    It's for initial assessment to join the scheme. My plan is to split the incoming via Henley block to a small DB Containing either an rcbo and main switch or an rcd and mcb. Swa to isolator with armours connected to pme at new DB. TT at hot tub end. It's going on a patio approx 3 feet from a...
  7. R

    100ma/30ma rcd for hot tub

    Yeah I've got to split the incoming to an rcd as the existing board is dual rcd so no where to add an rcbo. I'm just trying to get a sound understanding of the install and safety aspect as I hope to use this for my NICEIC assessment. I really appreciate your response. Thank you
  8. R

    100ma/30ma rcd for hot tub

    So just to clarify if I was to use a 100mA rcd it would be best to use a time delayed one? Thank you for your response
  9. R

    100ma/30ma rcd for hot tub

    Thank you for the straight forward reply. With regard to the delay aspect would this be achieved simply by the difference between 100 and 30 or would the 100 need to be time delayed? Tom
  10. R

    100ma/30ma rcd for hot tub

    Hi I posted recently about a hot tub supply I was needing advice with. One reply I got was directing me to a video by dave savery. Having watched the video I have a question. On his install he puts a 100a 100mA rcd and 32A 30mA rcbo in the same enclosure at the house supply end. Meter tails...
  11. R

    The dreaded hot tub!!

    Thanks for the video. pretty much exactly what I needed to know.
  12. R

    Loop testing question

    Hi All Whilst carrying out some testing today I had the following messages on my Kewtech KT64DL. L - N >20ohms - this was on the ring on only one socket, all others tested fine. Could this be a faulty socket? n-pe hiv - this was on the upstairs lighting circuit. Was testing in the loft where I...
  13. R

    The dreaded hot tub!!

    Sorry I forgot to mention its 32amp
  14. R

    The dreaded hot tub!!

    Hi Guys So I've never installed a hot tub supply before so take it easy on me. I've spent a bit of time researching it myself and its a minefield of conflicting information. From what i've gathered I need to run from the DB to a rotary isolator. RCD at DB. Connect armouring of swa at DB end...
  15. R

    Do I need two SPD's?

    Hi I've got a summerhouse/garden bar job coming up and was wondering where I need SPD's. I think I may need to split the main supply via henley blocks and go to a switch fuse to supply the bar. My question is do I need an SPD at the switch fuse and also at the CU in the bar. Would an SPD at the...
  16. R

    Surge protection devices

    Thank you. In a nutshell just fit them
  17. R

    Surge protection devices

    Hi Guys Hoping for a straight forward answer. Please can someone tell me if SPD's are mandatory in domestic dwellings at the moment (Amd1) and are they going to be mandatory with AMD2. Thanks
  18. R

    Where to start with new business?

    Hi So basically I went self employed at the end of January and I am currently subbying back to my old boss. I'm not originally from where I live (Stamford, Lincolnshire) so dont have a big network of family or friends. My problem is how do I generate my own work. So far I've only picked up one...
  19. R

    Can it be done??

    Yeah I thought it wasnt a straight forward thing. I'll stick to a 2 gang switch and two 1 gangs either side of the bed. Thanks
  20. R

    Can it be done??

    2 bedside lights to be installed. Can you turn both on from one switch as you come in the bedroom then turn each one off individually from a switch either side if the bed?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top