Search results | Page 9

Search results

  1. Gazthesparky

    Tails into metal switch fuse

    That's your opinion but the trunking has cables from above and below so would have had to mounted the unit right in the corner and drilled 2 holes in the corner of the unit Plus all the holes are already punched in the top of the unit so just have to knock them out
  2. Gazthesparky

    Tails into metal switch fuse

    Sorry its taken so long to update this thread but i have finally finished the rewire I was working on and as I stated i will post some pictures of the finished switches and board. I fitted a AM3 metal wylex board and have to say that it was very spacious and easy to terminate. one gripe I have...
  3. Gazthesparky

    Main switch bs numbers

    Thanks to everyone was having a brain fart at the time it clears it all up :-)
  4. Gazthesparky

    Main switch bs numbers

    Having a brain fart at the moment could some one put me strait and help me out. I'm filling in an EIC and in the part it says main switch/ switch fuse part i'm stuck on which BS number to it put. i have a metal switch fuse so its that BS number i'm putting in. I don't know what to list as a BS...
  5. Gazthesparky

    Fire alarm system, type, should I, etc.....

    Hi Tazz Just re read your original post and i read it wrong. I thought that you were saying that class change is not allowed any more but i now realize you were referring to using the class change facility to link a new panel into. As you say this doesnt conform as there is bno way to monitor...
  6. Gazthesparky

    Fire alarm system, type, should I, etc.....

    Hi Tazz Just a quick question with regards the first couple of sentences. I'm not questioning you but have the regulations changed in the last few years ? I use to work installing alarms in schools and use to program class change this was over 5 years ago so just wondering if regulations have...
  7. Gazthesparky

    Tendering for a extension project but not registered

    I guessed that and it really annoys me when people think the NIC are the be all and end all I think I will say to the customer that I'm not with the NIC and also might include a line or too on my quote Don't know don't want to put myself out of work because I don't jump through the NIC hoop
  8. Gazthesparky

    Tendering for a extension project but not registered

    Ok then I guess you can not be an electrician unless you belong to Select or NIC. I am only asking as a lot of people wrongly think the NIC is the be all and end all and only NIC contractors can work on projects. I'm only asking if people have come up against this before or is that a hard and...
  9. Gazthesparky

    Tendering for a extension project but not registered

    Pm sent
  10. Gazthesparky

    Tendering for a extension project but not registered

    Going to just seen the note and thought it might be a problem hopefully just the architect being blind sighted and thinking the NIC is the only qualified people
  11. Gazthesparky

    Tendering for a extension project but not registered

    Not 100% sure not been to site yet but Glasgow area I think I've just been sent the plans and asked to tender
  12. Gazthesparky

    Tendering for a extension project but not registered

    Domestic
  13. Gazthesparky

    Tendering for a extension project but not registered

    Hi Looking for opinions/ advice I'm in Scotland by the way so part P doesn't stand I've been asked to put a quotation together for a rewire and extension project. They have sent me over the plans and I'm just having a first glance at the architect drawings and in the notes it states that the...
  14. Gazthesparky

    Shed Supply

    If the house rcd stays on with the spur on and the shed rcd off I would guess there is a fault on the shed circuits. At a guess there is a light and socket circuit. So check these for faults. Also the socket mcb needs swapping for a 16/20 amp mcb as its a radial circuit as the 32amp mcb is...
  15. Gazthesparky

    Tails into metal switch fuse

    It's a work in progress there's one set of 25mm tails from the meter feeding the switch fuse Then a Swa out the bottom to the consumer unit which isn't connected yet Out the top there's a set of 16mm tails feeding a temp board This was done because the meter was due to be changed and I...
  16. Gazthesparky

    Tails into metal switch fuse

    It's there lol look closely on the 25mm tails further up I'll remove the temp tails and slide the rest of the gland up and screw it down
  17. Gazthesparky

    Tails into metal switch fuse

    Right well that's the switch fuse fitted I had to fit the tails in the top with a stuffing gland For the moment the temp supply board tails are in the top of the stuffer as well once the temp board is removed I'll put the stuffer together and screw it secure to maintain the ip rating Next...
  18. Gazthesparky

    Tails into metal switch fuse

    Right thanks all for your replies I have installed the metal switch fuse and 25mm Swa heading to the consumer unit In the end I installed the SWA into the bottom of the switch fuse and then used a 32mm stuffing gland in the top for the tails I didn't have enough room in the bottom to put a...
  19. Gazthesparky

    Odd battery drain problem.

    Do you have Bluetooth phone connectivity in your car? It's a common problem in audis where the module goes faulty and causes battery drain as the module doesn't switch off . Not known if to pulse but worth a try
  20. Gazthesparky

    Bs7909

    Is this the Bectu skillset course? I have done this course and i found it hard going. it was 2 days of constant work, really it should have been a 3 day course. The way I see it is its a bolt on course for sparks who have done the 2391 or 2394/2395 and it gives you the additional knowledge of...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top