Search results

Search results

  1. M

    Long extension between meter and consumer unit

    Thanks for the advice, so if I'm able to run the cable through the house under first floor and under out building roof (which is at the same level as house first floor) what 25mm cable could you suggest which is easier to work with, as I totally agree swa cable is horrible, especially around...
  2. M

    Long extension between meter and consumer unit

    I totally understand its not a diy job for a novice but if I were to pre lay the cable, then I can same time and money by getting an electrician to only connect it up and mot spend hours laying the cable. In my situation, I live in an old house where the meter and consumer unit are above the...
  3. M

    Long extension between meter and consumer unit

    I am planning to go semi off grid with a victron and battery system. The system will be installed in an out building about 20 meters away from where my consumer unit and meter currently is. I need to run the grid power from my meter to the out building to the victron inverter, but then also...
  4. M

    Economy 7 advice needed

    I am asking on behalf of a friend who has an outbuilding that he uses as an art studio, the building is fully insulated and is currently heated by 3x 2kw convector heaters. The problem is that his heating electric costs are very high using standard daytime tariff, so I suggested to him, why not...
  5. M

    What export options are there currently?

    Hi guys, I can fit 15kwh worth of solar panels on my roof space, and i'm debating if I should either export to off set my electric bills or go off grid. The roof is on a commercial building but we only have single phase supply. So is it wothwhile exporting compared to going off grid? what are...
  6. M

    switch and socket height in new build commercial shop/workshop

    I'm wiring it myself, I don't have the budget for a contractor, it's not a job I'm incapable of, just need to know the answer to my question.
  7. M

    switch and socket height in new build commercial shop/workshop

    Is there a minimum/maximum height of switches and sockets in a non domesic building? Im building myself a commercial unit with public shop area and need to know if the same rules apply as with domestic? Also is it correect to mount break glass call points at 140cm from ground level?

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top