clipsal

clipsal

Recent contents View information Top users
  1. K

    Which Type 2 SPD (preferably without the need for separate MCB) will Fit inti ClipSal CU

    Hello, I have a Clipsal consumer unit with two "ways" unused and blanked off and potentially a third available as the Proteus Geyer B16 MCB is labelled as "spare". This consumer unit only contains the main double pole isolator and MCB's. Please see the below photo. I am getting an EV charge...
  2. C

    Hi guys, has anyone got a fix for clipsal saturn series mech on a 2 way light staying dim when off?

    I have run new cables, segregated the SDI cable running back, so the LED will switch independently and have also installed a capacitor, since I was informed that would be a fix but it bursts light. The picture shows bottom mech with the switch on and bottom mech with the switch off. Thanks so...
  3. G

    Unknown Clipsal Dimmer Switches

    I have moved into a new house and switches are Clipsal dimmer switches, which I cannot find online, so assume they are end of life. See attached. They appear to be programmable, but how and for what, I do not know. So have the following questions: a) What model are they? b) Is there a manual...
  4. G

    Clipsal 6 gang switch alternative

    Hi all , have a vile 6 gang clipsal switch which I need to change trouble is the 3 5mm pins are top and bottom none on the sides , is there an alternative switch out there that I can fit . Cheers grand
  5. westward10

    Clipsal rcbo.

    Tested a Crabtree Polestar board today full of Sector rcbos, tested many of these boards and never seen this. The only Crabtree devices were two mcbs but the Sector devices are identical to Crabtree devices. Out of the nineteen four failed which is something you don't get with Crabtree rcbos...
  6. B

    Amendment 3 and clipsal c-bus?

    Over the past few years i've been installing some Clipsal C-Bus home automation systems in some of the new houses i've been wiring. Usually these are bespoke, rural mansions. The last project i had included over 100 lighting switch's, 50 electric blind relays, 50 electric curtain relays etc...
  7. B

    Looking for Clipsal 32am RCBO alternative

    Hi, Firstly I'm not a electrician. I am having an extension done and the electrician pointed out to me that i need a Clipsal 32amp RCBO. I have no other available slots in my board. I have looked on ebay and could not find any. I have also searched on the forums and seen people mention Volex...
  8. O

    Clipsal RCBO

    Hi all, I need a 32A 30ma rcbo to fit a Clipsal board originally purchased from Wickes. I can't find a Clipsal type anywhere so does anyone know of a compatible brand that will fit? Thanks in advance.
  9. polo1

    Clipsal or equivalent rcbo

    Hi guys/gals, can anyone confirm what other make(s) of rcbo will fit a Clipsal split board? I've searched the forum but can't see any definitive answers - and please, no debates about mixing makes of mcb, rcbo etc, needs must. (if anyone has a 10amp Clipsal rcbo to sell, that would be even...
  10. polo1

    Clipsal equivalent rcor can anyone bo

    deleted - see new thread.
  11. A

    Clipsal RCBO's RCD's new match up to wylex , Crabtree and more

    Hi I have a various amount of brand new clipsal RCBO's and a couple RCD's they match up to wylex,Crabtree and maybe more bargain price of £10.99 - £12 inc free postage here is the eBay number 271245931996 (check other items for sale) I have B6 B16 B32 on the RCBO's and 40a and 80a on the RCD's...
  12. S

    Clipsal C-Bus Relay System.

    Hi chaps, Going to look at a fault on the above system which i am guessing is the relay. Client is complaining that one set of lights goes off randomly and then comes back on. Has anyone any experience with this system? Is there anything obvious to look for? Cheers. J
  13. J

    Anyone using Clipsal C Bus?

    I'm pricing a job where this has been specified. I ran into another contractor who said he had had nothing but problems with this kit. I use other automation and lighting control systems adn I'm considering selling against. That said, if its a really good robust system, I'll consider learning...
  14. 1

    GET - Clipsal MCB Compatibility?

    Please could someone confirm that these are interchangeable? My brother has a GET consumer unit and from the information I have read so far it seems that Clipsal available from Wickes or Hager can be used. The reason for my asking is because he has experienced a couple of random RCD trips...
  15. B

    do wylex and clipsal match with each other?

    Hi all, I have a clipsal B32, needs to be replaced with a 50A circuit breaker, found a wylex B50 in screwfix, can it be fixed in clipsal board easily? cheers
  16. P

    clipsal cu

    does anyone no which other make of breaker/rcd will fit a domestic clipsal cu

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top