din rail

Recent contents Top users
  1. S

    Can I use three pin plug 240V mains to supply DIN rail transformer?

    I recently moved into a new house that had a ring camera hard wired using bell wire. This was also hooked up to the houses old chime. I didn't want the ring camera so switched it for Eufy C31 which I also want to hardwire in the same way. Unfortunately the transformer for the Ring only supplied...
  2. M

    UK DIN rail transformer left loose inside consumer unit enclosure

    I have a doorbell I want to install. The issue is the 16v transformer is designed to sit on a DIN rail. I have a 10 way 17th edition BG Nexus consumer unit which is fully loaded with RCBO's. I got a guy round for a quote and he said if it won't fit on the DIN rail it would be fine to leave it...
  3. R

    What's the point of DIN rail terminal blocks?

    I keep seeing these on pics of installations, mostly industrial, and just wonder what they're for? Are they fused? Why put one in when we can go straight to the breaker instead?
  4. M

    Which din rail meter?

    I want to monitor total kwh used in a granny flat with it's own consumer unit. Which one should I use?
  5. T

    Verso spd location on the din rail

    On the verso cu wiring diagram the spd is not after the main switch? Does the spd not have to be upstream of the rcbos
  6. W

    Component Din Rail Terminal

    Hello, I am looking to get some din rail terminals what I can put a 500 Ohm Resistor in. In the past I have used ones like in the photo attached, I cant seem to find them online now. Can anyone tell me the correct term to find them on RS or any other supplier. Thanks
  7. HappyHippyDad

    Din rail meters....?

    My customer wants a meter for the small garage CU I am fitting. The CU will have 2 circuits, 16A sockets and 6a lights. My question is, do the din rail meters just monitor one circuit or can they do more than one. Could anyone link to a suitable din rail meter that monitors the whole usage...
  8. J

    Din rail terminal blocks for data/telco cables

    Anyone know if you can get din rail terminal blocks for joining data/telco cables?
  9. T

    Din Rail Terminal Blocks

    Hi all, I'm looking to shift the wiring of an exceptionally awkwardly placed old fuse board to a shiny new 18th ed compliant board a few metres away. As all the wiring will still have to come to the new board from the old location, literally at the back of a 2m deep cupboard and directly under...
  10. bigspark17

    Sourcing large din rail connectors

    Having trouble sourcing some large din rail connectors 60-100amp would be perfect, any member know of a seller? Thanks :)
  11. wheeto

    Mounting DIN rail in boxes

    Hello, I'm looking for a bit of advice: does anyone have a satisfactory way of mounting DIN rail in adaptable boxes? I normally end up mounting the box, then drilling through the box into the wall behind and mounting the DIN rail that way, but it feels a bit wrong ... does anyone have a good...
  12. Baddegg

    Din rail enclosure recommendations

    Need to move a CU up approx 9 inches.....was thinking din rail enclosure with wagos, never done it before so was after some recommendations and advice ?
  13. J

    din rail mounted bell transformer - earth?

    hi i've bought a hager st303 din rail mounted door bell transformer and a 2 module wylex ESE2 enclosure for it to fit in. i was going to run this off a 3A FCU. i can't see any earth connection on the transformer from the photo - it haasn't arrived yet - and there's nothing to earth in the...
  14. robd

    Din rail enclosure advice please

    Morning all Just looked at a job where the consumer unit is moving, can't move the legs without a great deal of upheaval so looking at using an enclosure to extend the legs through the wall to the new position. I would like to use an enclosure with a dinrail and dinrail connectors, there are 6...
  15. B

    SAK din rail terminals

    Hi just wondering if anyone would know this, regarding sak din rail terminals when are separation plates really required obviously at the end of the sak so no exposed terminals but are needed between different type terminals such as live and neutrals or is this just a preference ? Thanks in advance
  16. D

    Hager Din Rail Mounted Time Switch

    Has anyone fitted these into an Invicta 3 Type B board? Wholesaler asked Hager whom stated they need to go into a separate enclosure, but couldn't elaborate on why. My preference is to mount them in the DB under the corresponding RCBOs and I cannot see from the spec sheet and photo why this...
    • Deleted member 105166
    • Thread
    • din rail hager mounted switch time time switch
    • Replies: 12
    • Forum: UK Electrical Forum
  17. Simonslimline

    Din rail Fuse carrier.

    I am looking for a fuse carrier to go in an MK AMD3 CU. Ideally rated at 40A. Only place i can find one is a 50amp on ebay. Not so sure i can trust it though. Anybody installed one before at this rating And know of a reliable supplier? Thanks in advance. :)
  18. S

    CSU Mounted or DIN Rail External 24V Bell Transformer

    Any recommendations?
    • Squid
    • Thread
    • 24v bell din rail external mounted transformer
    • Replies: 4
    • Forum: UK Electrical Forum
  19. C

    MCB Timer that fits Proteus type B din rail?

    In my garage I have a Proteus mcb consumer unit. There is some garden lighting directly attached to a B20 single pole. No switch ! have to walk 100ft in the dark , open the garage and flick on the MCB to get the lights on. Such a bizarre installation. The cable runs under concrete , no chance of...
  20. T

    KWh meter din rail mounted for wylex board

    Hi so any ideas on din mounted MID rated single phase kwh meter? I am required to fit a meter for sockets in a unit. At the moment the sockets are fed from a 32a mcb in a wylex plastic D.B. older type. See photo. All suggestions treated in confidence and will be touted as my own brilliant idea...
    • The Ghost
    • Thread
    • board din rail meter mounted wylex
    • Replies: 16
    • Forum: UK Electrical Forum
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

TrueNAS JBOD Storage Server

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.
UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
Back
Top