Was wondering. I haven't been to college for about 3 or 4 years now and I can't seem to remember what they said about doubling over conductors in a ring circuit.
So in a ring circuit using 2.5mm twin and earth cable, is it recommended that you double over the conductors before terminating them...
Evening guys
bad a school boy error! 1st fixed a single back box for a euro mod plate of 1x BT, 2x CAT5 outlets- obviously i can only get 2x mod in a single back box durrrrrr!!
the 2x cat5 are the 'start' of the radial out -as this is where it will connect to the router
can I double up the 2x...
Working onsite with a few apprentices the other day and noticed that every cable they terminated into the mcb or rcbo was doubled over, so when I asked them why they were doing it there reply was college taught them to do it that way. Now I have always terminated the cable without doubling it...
Just wondering what the regulations are on doubling up meter tails?
My girlfriends dad wants to convert the garage into a 'granny flat', and I plan on doubling up the connections in the meter to take a new 16mm supply to the garage. Opinions?
Just wondering what people did.
What cables do you double over? 1mm, 1.5mm, 2.5mm? single
do you double over if theres two 1mm cables going into a fitting if its tight?
Also how tight do you tighten 1mm or 1.5mm
Is it easy to over tighten these? How about 2.5mm, i usually tighten 2.5 as much...
I swear to god there was a reg specifying that all single core connections had to be doubled over? i can't find it anywhere
have i just had a weird dream?
Good morning all, I was called out to diagnose a fault with some 2d robus light fittings. After some research it turned out the installers had programmed the PIR with the wrong time sequence (5mins) the tube and ballast were both being damaged as min run time should be 15mins.
What stumped me is...
I am putting up 2 security lights, 1 front 1 back and for ease of cabling It would be best to take each light into the cu separately and share the mcb.
Is this allowed??
Came across a consumer unit last week where someone had lengthened the busbar by doubling it up - i.e a five way bus bar clamped into the RCD then three MCBs on single prongs then two MCBs on two prongs then three more on singles. It seemed mechanically sound i.e a good connection but is it...
Is it an exceptable method to double up conductors in a 4 core cable to increase the CSA and then put in a seperate CPC?
If so, then as there are no tables for doubled up sizes eg. 5mm, 8mm squared etc, would it just be a case of doing the calcs for the single core size then dividing by 2:confused:
hi fellow sparks
Ive been told whilst working for my present firm that we can double up on breakers if we are fitting a fused spur to the meters we have been installing,the meters only run 0.6 amps
and we usally put them on a 3 amp fuse and on a 6amp mcb.since being told the regs are changing...
Hi everyone. Im a fire alarm guy, who was qualified as a spark, over 27 years ago, to the 15th edition.
Just fitting a new alarm system into a kids nursery school, and noticed that a new consumer unit had been fitted since I first quoted the job. The spark has doubled up two 10mm earth singles...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc