Hi Guys
Just seeing what you all use use for buried garden light connections, to seal up fully from the elements/ vermin?
Been using 3M gel connectors for a while without any issues...
I currently have some 12v outdoor lights which have a plug with a built in transformer.
I would like these to turn on and off without having to go outside so ideally would like to have them on a timer but not sure of the best way to incorporate this while keeping it looking presentable...
I purchased Litake led garden spotlights several months ago and they recently started flashing and have now packed up altogether. I’ve checked the wiring and there is power to each light. When I unscrewed the lens I could see it’s not a conventional led bulb. How can I detect and fix what the...
Hi all,
Hope you are all well and all is good!
Can anyone recommend a nice looking garden light that can be surface mounted with side or bottom entry, e.g. can be retro fitted with surface mounted cabling?
Thanks in advance,
Martin
Hi
Could anyone advise...
I have a weatherproof exterior box with an RCD socket inside.
My garden is gully chipped and stoned.
I was hoping to put up 2 post lights and run from a plug in to the RCD socket without having it classed as an installation.
My question is, the 2 lights are 60w...
Local friendly and reliable electrical company with 30 years experience in commercial, domestic & industrial fields. Wether it’s that extra socket in the kids bedroom to a garden lighting design and install, you will get the same level of service. In need of a new lighting design or upgrade to...
Hi all. I'm looking to put some of them golfball style string lights around my patio area. Is there any way of connecting them to my soffit lights. All the lights I can see are plug in ones. Thanks
I currently have four 42W Outdoor Spotlights in my garden
I have used this - HALOLITE LOW VOLTAGE ELECTRONIC TRANSFORMER 20-60VA to lower the voltage, this is in a box mounted to an outside wall.
For some reason the lights will not stay on for longer than 5-10 mins, after which they all start...
I have garden lights and lights on my fence that I would like to arrange for them to switch on automatically when the sun sets for security purposes. I currently have switches for all the lights on the fence and the garden lights are huge LED appliances that are also hooked up and switched on by...
Hi all
I have a customer who wants LED lights around his newly built garden wall.
He wants 12 in total currently there is already a existing outdoor socket in the garden which is fed from the ring final circuit via a FCU
At present he would like to keep the outdoor socket.
He doesn’t want...
summers coming so deciding to re do the decking in the garden anyone got any pics of the colinwood GL050 and GL019 installed and working just to see what the beam spread is like etc ?
ta
Opinions appreciated on this one.
Garden in approximately a square, 20 metres pr side
The board is under the stairs and I'll run a 6aRCD protected feed behind the units to the rear wall and into the garden; everything outside in Schneider boxes filled with Ray Tech Gel
Cable will be either Hi...
I've been searching for a 12V LED lighting setup for my garden and have just come across this forum - and I hope that someone can provide some advice.
Specifically, I'm looking for lights to light up a patio area. It's an area of about 6m square and I'm thinking of using 4 wall lights (two each...
My second post I am getting brave:blush5:
I am estimating a job this week for a customer who wants three garden lights mounted on his fence approximately 75 metres, so each light at approximately 25 metres.
The plan is to run from the consumer unit either 1.5mm or 2.5mm twin and earth through...
I need to supply power to a couple of garden lights and a 13A socket in a longish garden.
The requirements I've been given so far are a bit vague - the socket needs to go at the end of the garden, the lights will probably go somewhere along the side of the garden, and I'm assuming that they...
I'm having a lot of problems with a bunch of mains operated garden spike lights I've installed. There is moisture getting inside a lot of them causing the RCD to trip. This is in fact the second batch I've installed after the same thing happened. The brand is Saxby, which are supposed to be a...
Evening all..
I have been asked to install 2 garden lights, the chap says most likely they will be spike lights in the ground. I was wondering how everyone loops them together? There will be SWA coming from the house to first light and also SWA linking 1st to 2nd light
I have had a good look...
Guys im in need of your help and guidance again please. Im a spark in a industrial environment so when I get asked to do any residential jobs sometimes I get stumped. What it is is my pal has asked me to put him some outside lights in his back garden, the builder has ran and buried a cable in...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc