greenhouse

greenhouse

Recent contents View information Top users
  1. T

    Wiring greenhouse

    Hi, I'd be grateful for some pro. advice on the best cable choice and termination throughout a domestic greenhouse. The building is relatively large at about 100sqft and will naturally be a permanently hot, wet, 100% humidity and UV-intense environment. The building will have an IP56-rated...
  2. A

    Hi guys hope you can help me , i have a large greenhouse , and only one side shuts, control unit? Cheers

    Hi guys hope you can help me, I have a large greenhouse and only one side shuts, control unit? Cheers
  3. jimmy gunstone

    greenhouse climate controller voltage help

    hi, I am looking to buy a greenhouse controller from the usa as I run a small commercial plant nursery. unfortunately a good unit is hard to source in the uk. my question, can I use this from a regular uk power supply? link to the product and specs CHHC-4i Total Environmental Controller ...
  4. charlie76

    Supply to greenhouse

    I've been asked to go and look at a job running a supply to a greenhouse. I assume I need to main bond the greenhouse alu frame?
  5. A

    Greenhouse frost protection

    I have a customer who would like their new greenhouse to have some degree of frost protection. In previous years they have used a plug in fan heater hung from the ceiling with an extension lead from the house! I told them I can come up with something better than that... Starting with a new SWA...
  6. M

    Greenhouse socket supply

    Just wanted to see if the following is the correct way to supply a socket in a greenhouse. Firstly the supply is tn-s and the customer wants a socket in the greenhouse for a heater. Now the supply to the greenhouse would come from the shed supply as it’s on a separate circuit. I was thinking...
  7. R

    Supply to Greenhouse

    Would appreciate any advice taking power to a greenhouse. Greenhouse about 10 metres from house. Intended loads are lighting and sockets for 3 kw heater and propagator. Supply is TN-S. Run 3 core SWA from FCU off downstairs ring main (on RCD board) inside house with armour tied to earth at house...
  8. La Poste

    My dad's greenhouse

    I have been reading a little about bonding and outbuilding supplies and have just had a thought. My father has a metal framed greenhouse with a socket inside supplying a heater. The heater is metal and the socket is metal clad. The supply is TN-S and I am not sure of the loop impedance, I can...
  9. S

    Greenhouse supply

    Need some help have a customer who wants a double socket in a greenhouse to use a heater on there is a supply on a garage just two meters away which is fed from the house and is rcd protected what can I use, do thanks thecable from the house is buried about 450 mm in PVC conduit can't find any...
  10. J

    Power in greenhouse

    Hi Guys I have been requested to put a power socket in a greenhouse. I know the boxes etc to use but my question is this. Should the frame work of the greenhouse itself be bonded? Be gentle, I'm new and would rather ask the experience of my piers than muck up! Cheers Jon

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top