After a few minutes the knob gets too hot to holfd<60c
The connections on the switch body stay cool.
The grill works fine.
Should I replace the switch asap/sometime?
This isn't very electrical, but never mind!
I'm adding an extractor fan to a bathroom in a 4th floor flat.
The builder has helpfully cored a hole for me (110mm)
In the past I've used the Manrose Internal fit wall kit which works brilliantly IF you know in advance and core a 117mm hole...
Hi, I was wondering if anyone can help me, I'm trying to work out which two of these three microswitch tabs to use. I have a Hotpoint Hug52 oven and the grill won't stay lit. I checked the thermocouple and it looked in a poor state so I have installed a new one. I took a photo of the wires on...
Hi guys!I have a question.
We have a 3 phase electric grill with two cooking area and two separated circuit will feed those areas lets say left h side and right h side.Both circuit will be protected by 30mA RCD.My question,is it possible to get a dangerous situation if on both circuit will have...
Hello
So I was baking some bread in the beko 562 oven when suddenly one shard of glass fell onto the plate. Then another. Any idea what these are for and should I be concerned? The glass came from the grill element hole, on the backend of the oven ceiling.
Thank you for reading
I bought the above counter top oven, its a 16 Amp plug to connect to mains around five years ago. It was left in its box, for emergency use.
I took it out, and used it. I turned on the oven and It tripped the RCD on my Kitchen Fuse Unit.
I plugged in into plugs I...
Welcome to the rebranding of the Americans-only forum. The Bar and Grill.
First drink is on us.
There should be around 670 members with access to here now. So let's get this place going.
No Brit's are allowed. Unless they're staff of course.
We have the access only area, The Bar and Grill, for American users only.
https://www.electriciansforums.net/forums/bar/
It's located within the American Professional Electrical Advice forum category, so it's a sub-forum.
The short URL to get to it quickly is to enter /forums/bar after our...
Our built in oven works fault free with all functions except for the grill which trips a breaker when switched off. Not while being used but when being switched off.
There does not appear to be any visible breakdown of the element.
Is it worthwhile pulling the unit out and swapping out the...
Hi,
Bit of a strange one this, our oven of 8 years is causing the power to shut off when ever you open the grill door. Everything is fine with the Oven and the hobs.
If the oven is still switched on at the wall (Red Switch) and the grill is turned off on the oven, it still trips the electric...
Hi,
I am planning on using an electric contact grill on an outdoor food stall. (Link to the product manual below)
http://www.catering-appliance.com/product-pdf/53199a927a10c4a215084365220d5c93208d83c4f5e83/pantheon-cgl2s-warranty.pdf
The grill (Product - CG2LS) needs 2 x 2200 watts and has 2...
Hi, Just getting a new kitchen fitted and there isn't a cooker ring main in place so have bought a gas hob and oven to reflect this.
But I have to fit a Cooke & Lewis MG045CL Microwave/ Grill (due to the oven housing) which has an overall rating of 3.25kw (1000w microwave output, so about...
Hi. As above I'm installing fans on a social housing contract and have a number of houses in the street where it's going to be very difficult to get access due to downstairs flats having plastic cladding below covering there car port. Yes i know there's an option to remove this and do it however...
hi new to this site..
i have a 8 element 3kw grill thats elements keep blowing after a few days...
the elements should be 375watt 240v. totalling 3kw
im thinking they shoud have a 154 ohm resistance
my boss ordered new elements telling me they are 110v 360watt, just put them ones in.....
i...
so long story short im swaping bathroom halogen for gu10's
now the extractor has a mr16 in the middle.
have any of you guys come across one that can take a gu10?
The grill element blew the other day and I ordered and received a new one, fitted it and it's still not working. Could it have blown something else withing the cooker? All 4 wires are connected but there's no heat. The grill fan is working. I am stumped.
The cooker is listed as a Hotpoint UY46...
stoutlad
Thread
cooker
electrical work
element
grill
not working
other
possible
replacement
resistance
twin
working
Hi,
Please bare with me new to this, I have a belling electric oven. The problem is the grill, I can have it on so it heats up fine no problems there, but as soon as I put some bacon under and leave for a few minutes it trips my electrics. I have a cover on it so the electricans have been out...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc