help | Page 10

help

Recent contents View information Top users
  1. B

    DIYer needs help. Lamona built-in oven not heating

    Hello. The built-in oven is not getting hot. I took a look inside and see just one heating element which is at the top. It's a three-pronged one. Is that the only element for both grill and oven? I don't see anything else in the interior of the oven by way of electrical parts. The light works...
  2. timhoward

    Anyone help identify this?

    If relevant, the property did once have an overhead supply: Thanks. Never seen one before!
  3. X

    UK Help with full rewiring quote

    Hello. Homeowner trying to understand what is a fair quote for full rewire. We've had to tear the ceilings down as part of unplanned asbestos removal so it seems like a good time to rewire. The cabling in the loft is very yellowed/blackened. Would appreciate any help please. 1970s 3 bedroom...
  4. M

    Help an idiot out? Diversity and manufacturers' instructions.

    Hi all, I'm getting a 32a induction hob and a 13a oven installed as part of a kitchen refurb. The existing cooker circuit is 6mm protected by a 32a mcb. After a long trawl through various forums I think the prevailing view is that this is fine to use this for both appliances, because of...
  5. B

    How to wire these mini speakers?

    Please help me how to wire this, it’d be awesome if someone draws a simple diagram like the pic I posted but for my parts, I saw a diy video on YouTube for this mini subwoofer but it’s not clear where all the wires go. It’s only clear for the one speaker set up here in the diagram pic but...
  6. Q

    Max ZS - Help reading curves

    Hi All, As ever another question regarding Max ZS! I just need help reading these curves and getting my head around them. Data sheets confuse me and overload me with information. So I have a Terasaki S800-NE MCCB Here is the Datasheet...
  7. G

    Help with cable calculation please

    Hi Help please with the adiabatic I am doing a small design for my course and I can't figure it out. Any advice will be appreciated. Ring Final Ib: 30A In: 32A It: 20A Iz: 21A 2.5T&E method 100 V: 229V Ze- 0.22 Ohm L: 26m So r1+r2 = 19.51*26*1.2/1000=0.6 Ohm. R1+R2 = 0.6/4 = 0.15ohm...
  8. L

    Very sorry for posting here but need help

    I feel very very stupid but I started to hammer a small nail Into the wall and heard a clang when I hit with the hammer (not hard) I immediately aborted everything. However I am absolutely panicking I have hit something behind the wall and feel as though I could faint that I'm going to have a...
  9. cliffed

    Niceic technical help

    Talked to the tech line the other day hoping to confirm what I already knew, but with a definite answer regarding issues on EICR, on a property 40+ years old. Not a great experience I must say, putting all the onus back on me, What do you think you should do? At the end I gave a very...
  10. ilikemyhouse1

    UK Help identifying parts on an old Victorian house consumer unit

    Hi! I know the basics on a modern consumer unit, but I'm not sure on this old panel here. Could you help me know what I'm looking at? Seeing two big fuses there.
  11. E

    Design help level 3. Finding length

    Hi guys, I'm struggling with working out the length to fill In the gaps for my upcoming exam. I'm struggling with finding the length as I don't have or know the correct formula to use. The yellow highlighted areas will be blank in my actual exam. For example circuit 2 cable length is 12m and...
  12. 1

    Help Understanding EICR

    I would greatly appreciate if someone could help me understand the following outcomes on an EICR. I am being advised it needs a total rewire but I am a layman. The wiring is approx 30. Years old. 4 circuits, 2 x lights, one mains (incl kitchen), one for living room. We will be renovating the...
  13. J

    Need a little help, can I add a second PIR with a single core line in (live)

    Will this work?
  14. J

    Outside Post Light Help

    Hi all, I just moved into a new home that has a post light outside on the lawn that didn’t work with the sensor. I know I have power to it because when I wire the light to the house (bypassing the sensor), the lights stays on continuously. I’ve changed the bulb, sensor and lantern piece...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top