The hottub is 8.1kw so will be 35A max output , I’m going to put it on 6mm 3core swa to an isolator then to the hottub. Would a 40a b type be sufficient for this ? Or would it be better to put it on a 40a c type mcb? Thanks
I have someone that wants a hot tub installing and it’ll be my first time, I have came up with anxixeaxfwanted to check it was correct. I wanted to take swa from the CU to a rotary isolator 2m from the tub, then put a earth stake in near the isolator and connect that to it aswell then go from...
I also have a hottub mines the lay-z-spa paris specs say voltage 220-240V ~ 50Hz, 2050W at 20°C.
I fixed the melted plug my fault used on a thick camping cable plugged into mains in house. so now doing the job properly.
I have fitted a double ip67 waterproof socket on the outside of my shed...
Hi all, I am new here, and a DIYer, so please be gentle.
I recently bought an Intex portable hottub. One of the inflatable ones like the Lay-Z-Spa units. The unit claims it is only pulling 2400w and comes with a pre-fitted 13a socket with an inline RCD, and I confirmed this with an inline...
Hi,
I have to quote to provide a circuit for a hot tub outside. Could you let me know if what I plan to do sounds okay?
So from a 30ma RCD and 40A mcb there is an existing 10mm2 twin and earth going to the garden through conduit approx 20mtrs from the board. It is PME system. From there I...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc