intercom

intercom

Recent contents View information Top users
  1. James

    gate intercom / gate openers

    can anyone advise me what a good make of intercom and gate actuators for 2 x steel gates about 2.5m x 2.5m each opening as a pair. keypad entry codes required
  2. UKMeterman

    Installer wanted to supply and fit 6 station intercom Newport South Wales

    Hi, I am looking for an installer to supply and fix a 6 station replacement voice only with trade access button in Newport South Wales.
  3. O

    Connect Bell intercom to maglock.

    I used to fit Bell door entry systems all the while about 20 years ago but I'm a bit rusty on them now, am I correct in saying if you use a DC power supply the +12V goes straight to a yale type lock and the wire to the handset (Z) grounds the lock to the 0V rail completing the circuit and...
  4. US1549

    Comelit audio intercom handset unlock button not working

    I have just removed the keypad module (art.3188) on a comelit vandalcom audio intercom and blanked it off. I installed a siemens K42 keypad lower down on the post (as customer unwilling to pay for a replacement comelit module in excess of £400.) I stupidly forgot to take a picture of the wiring...
  5. Kallo444

    Experience with 2-wire Bticino intercom

    Hi Guys, Does anyone have experience with Bticino intercom systems? I am trying to replace my old Bticino unit with newer model as per the diagram below. Everything seems to work fine, except the most important part. When a visitor calls from the main entrance the new intercom unit does not...
  6. M

    Wiring a 4 wire intercom station to a 3 wire.

    I have an old 3 wire intercom station which I removed, and purchased a new one. Happens that the new one has 4 wires. Is it possible to connect my 4-wire intercom station to the 3 wires from the wall? Also if anyone has the internal switch schematic, that would help diagnosing this if its possible.
  7. B

    Wiring Ring Pro using existing intercom wiring

    Hi folks, I just need to sanity check what I'm going to do :) So I've just bought a Ring Pro Doorbell and it's going to replace a broken intercom system: https://www.tlc-direct.co.uk/Technical/DataSheets/ESP/enterview3manual.PDF Am I oversimplifying it to say that if I unplug the internal...
  8. H

    Intercom wiring help

    Got an intercom to sort, the pictures speak for themselves I think. What happened was a dog chewed through the cables and some Jack the lad tried to fix it. The ones with orange conductors haven't been touched. The one with a yellow conductor to the terminal has been touched - that is how it is...
  9. S

    Gemini access video intercom

    hi, We have recently been asked to take over maintenece of a Gemini access control on a large block of flats. We have never used this system before and on looking u the company they were disolved in 2013. Our problem comes when we need to replace one of the handsets (that seems to be required...
  10. M

    Urgent! Need help with connecting an Intercom

    Hello I have recently purchased a new house hold intercom (Videx 3000) Door Entry Direct, door entry systems, video door entry system, intercoms, door entry system I am now trying to replace my old one, however once I have unscrewed it, I have found 6 different wires 2x Green 2x Orange 2x...
  11. D

    Fitting an intercom?

    Mate has enquired re fitting an intercom on her freehold property, to each of three flats. I assume not fancy will-open-the-door one, and she seems to be open at the moment re video or just audio. I reckon trickiest thing would be drilling through walls without incident, and I'm guessing new...
  12. V

    comelit intercom ???

    hi all i have called to a house today to have a look at a couple of problems all fixed without any hassle BUT had a look at a comelit intercom system with 4 handsets the thing is that when there nobody at the door and none of the hand sets are up the intercom at the door is making noises as if...
  13. H

    Intercom problem

    Intercom not working on electric gates installation. 2 seperate gates with 2 intercoms in parallel and one phone operating from the 2 comms. Comms are fed from 240v - 12v PCB/transformer. On the out side of the transformer is 0v 12v ac and another that is 0v +12v dc. Fed from 0v 12v ac...
  14. S

    Dual ended intercom system

    Has anyone come across a dual ended intercom system for opening an outside door e.g one that could be switched between an office in the day and a residence at night?
  15. S

    Intercom Handset

    Hi guys, Starting to get more and more intercom jobs now. Got one where this old handset needs replacing apparently, i haven't been to see it, just been sent a picture. Can i just replace this with any other new one???? Doubt i'll be able to get the same. I'm not an expert on intercoms. Cheers
  16. S

    Comelit to Commax Intercom

    Hello In my house I have a Comelit 5 wire intercom installed which the intercom panel has been smashed up http://www.onlinesecurityproducts.co.uk/co...rfaceflush.html My plan is to leave the handset, transformer in and just replace the panel with a Commax panel...
  17. E

    entryview 5 intercom

    has any one here got any experience with the entryview 5 intercom unit? did one the other day for the 1st time ever. connected power supply, the transformer might a very low humming noise then it popped and that was it! tranny was dead! has this happened to any1 else, Can wrong...
  18. L

    intercom door strike problems

    Right where do i begin ... Got called to job because door had been kick in by police abd the door strike wasnt working so took off old strike and replace with exact same strike but new. New strike 8-12vac on testing i was getting 11.34v so that was fine . So after install door strike worked...
  19. D

    Magnetic lock intercom

    Hi there anyone with any experience with door entry systems? I installed a thob sytem with a card swipe one side and an push to open the ither side in a shop this afternoon just wondering if the varistor is needed in this kind of system if so what does it do. On the instructions it's says place...
  20. R

    intercom system

    Hello again, To wire an simple intercom system to 3 flats, what are the cable requirements. Before i have just taken a cat5 from each flat to the panel by the front door. At the front door a supply will be provided for the panel. Am i on the right lines, If not could some explain a or tell...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top