Welcome, I have two desks and each of them have the same setup, in terms of the amount of LED strips, the amount of LEDs (I counted), but only different is LED Driver. So:
Setup 1:
LED Driver (Ecopac 24W IP67 Rated LED Driver (EPV-24 Series)) - 24V
4 LED strips
Uses 1.3W
Setup 2:
LED Driver...
Before I build this thing from scratch, I just want to see if anyone has come across a pre-existing LED driver that does this...
Myself and some neighbours want to install LED strip lighting around our driveways, triggered via PIRs. Tried a strip my work had spare and it looked great. But, we...
Evening all,
I've recently done some emergency lighting testing at an office and several of the sign lights are in need of repairs.
One of the lights in particular is a 12v 3W LED strip. I've tried to source a driver and battery backup box directly from the manufacturer but the price is a...
Hi Good day
I have a problem and hope someone can help me or point me in the right direction. I'm a guy who like DIY and bought 10 Led Strip Light the make is
Bridgelux
BXEB-L1190U-40E3000-C-C3
Is the part number
It uses 38.2vdc per strip needs to be run @700ma.
so the wattage comes out to...
Hi Forum people. First time post here.
I have a pair of semi flush fittings that are currently 10 Halogen capsules per fitting. I want to convert these to LED at 2 watts per capsule. Space is a very limiting factor. Each fitting currently has a round transformer inside. I only have an 80mm...
Hi,
I wondered if anyone could advise on a suitable alternative to the following LED driver: Tried CEF, RS, and online but they can't get hold of the exact part.
Hey all.
Have a client who’s LED downlights keep breaking after 6 months or so. I didn’t put them in originally.
I looked the details on the lights and the transformers and they don’t seem to match. But I can’t find anything to match the light as the input current is 300ma and voltage is...
I'm not too sure which LED driver I can use to replace the one in the picture.
It states max 21V, does this mean any thing less than that is ok? It also says DC 24V though, which has confused me.
Would it be a constant current LED driver seeing as though thus one implies the voltage is...
Hi
Looking for a bit of advice on a led driver
The Aurora in the picture below is the one that needs replacing today / tmrw
And the only 700ma constant current driver I can find local has slightly different specs DC 16.5v max on the original
33 - 40v dc out on the new one
Will this work...
HI, I have these LED lights which require 9W
https://www.helestra.de/en/datasheet/helestra_PALA_15162907_long.pdf
It uses the LED Driver in the photo, which needs replacing (light is blinking).
I am unable to find the exact same mini LED driver from Gallop. I understand I need a driver with...
I have 4 sets mains / 36v LED strings and I would like to merge 2 sets to one power supply - plaese advise is this possible and what size transformer / LED driver would be needed?
Each string has 1152 bulbs at 0.043 per bulb
Label on wire of Lights states 36v~2.33A, 84VA then...
Had a Knightsbridge VFRIC8WW IP65 downlighter fail recently (started to flash), disappointing as only 18 months or so old and probably only a couple of hundred hours use (bathroom). Got a new light & driver but clearly just the driver had failed so all OK now.
Decided to take the borked one...
Using these lights (wired in parallel) 6 x 2W is ok to use a 12V constant voltage 16W led driver Aurora AU-LED16T. My question is they are a G4 fitting which goes, either way, does the polarity of the bulb cause an issue or do electronics inside take care of this. Many thanks in advance.
This might be a silly question and after 20 years doing this I probably should know the answer, but can a switched mode power supply and an led driver be the same thing?
Example: I had a job the other day and I got a ‘while you’re here request’. Customer has a couple of 12v deadbolts to lock...
I have a replacement LED driver for a lighting circuit that had normal halogen G4 bulbs. The forum has already put me onto the right track by explaining that the LED do not draw enough current to allow the original transformer to operate, so thank you for that.
However, my problem is I have...
I bought a replacement LED Driver that i thought would do the job but nothing. Ive test the leds all ok, input to driver ok but cant get a reading on the output of the driver. Am i setting the multimeter wrong?
Have i got the wrong led driver?
Or is the new driver faulty too?
New. Driver...
Hi,
I have two of the following LED panels https://www.amazon.co.uk/gp/product/B07FZ9CHFQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and one of the drivers has stopped working. I'm struggling to find an available LED driver with the same specifications as the existing one:
Input Voltage...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc