A few years ago i fitted some plain warm white LED tape, inside an alu profile around a customers bedroom. Sourced from YESSS at the time... around 16m, on a 150W psu.
The same people are now asking for another room to be done... but im getting nowhere asking either of my local wholesalers for...
Hello,
Does anyone know of a Driver for led tape that can adjust the brightness on the driver itself by turning a screw etc ?
Just need something I can adjust to the correct level and then leave behind a panel and just switch off and on with a lightswitch .
Daydreaming today while at the ice rink.
Last day of the season, and they turned on their disco lights and music.
I got to thinking about embedding lights actually in the ice.
Would it be possible?
Not worried about the waterproof nature, but more any heat generated by a standard LED tape...
I'm doing a job which needs LED tape under shelving, 6 shelves with ~1.2m of RGBWW tape under.
I've used downlightsdirect and downlights.co.uk for tape before with no issue, but quite pricey at 12.68/m. They are also probably a bit over powered for what will be ambient light under shelving, but...
Hi all can anyone recommend and decent external 24v led tape please . The length is the issue I think at around 10.5 metres ish.
Supply from 1m flex (fused spurr) I think the current might be an issue with only small cable in place ( ie a1mm flex going to tape transformer ) ??? 2x 5m reels at...
HI,
My project involves installing under-cabinet lights. Wiring is there and waiting.
Have any of you seen differences, gains, sacrifices by using 12v or 24v tape lights.... or Triac vs Magnetic dimmers?
Have you had any difficulty with dimmer switches with either? (not looking for Zwave...
Good morning,
Can anyone recommend a decent brand of led tape . I quite like ledvance products but can’t find anyone that stocks it. So looking for suggestions .
Thanks
Hey, I'm looking to add a quinetic switch to control a led strip for under kitchen cupboard lighting. The quinetic receiver is 6A so I'm wondering what transformer I'd need to feed the LED light strip? Many thanks in advance.
Hello,
I've recently moved into a new flat and want to add additional LED tape to the bottom of cabinets in the kitchen. They are 24v 15w, however, the connection port is like nothing i've seen before. It's like a small modem. There are additional ports, i just need the right connection/tape...
Hi All
Am on a job tomorrow and while there customer wants me to investigate newly installed 24v LED tape lights that keep flashing on and off. These are on a wall mounted dimmer. If tape lights and transformers are both dimmable which apparently they are this suggests problem is with the...
Hi All,
I'm looking for peoples opinions on down lights, what are peoples preferred -
Warm white
Colour changeable
Large beam angle
I'm also interested in what LED tape you are using, ideally tape that can go at 90 degrees.
All to be fire rated.
TIA
Dunk
Hi All,
Were currently having a rear extention being built, after we will be having our garden landscaped. Our garden is on two levels, the steps and retaining wall will be made of timber sleepers with the top one having a slight overhang and I'd like to put led lights on the underside.
I've...
I have a 10m length to light up, this will be a skylight.
A few questions..
Any recommendations for a good quality tape that is suitable for 10m? There is a huge amount of choice on the net but lots of poor quality products.
What is the best way to wire this up with regards series and...
As above really.
I've been trying to source a length of mains voltage LED tape to fit behind a purlin, not being keen to try and hide a transformer/driver for 12/24v.
Distance is 4.5m but everything I have found at mains voltage is cut by the metre.
I know I can do better than that because I...
Ive got a customer asking me about an LED strip around the perimeter of a bedroom. There is an existing coving which will be removed, and a new one fitted a little lower, with the LED tape hidden above the coving.
She has mentioned that there is going to be a mural painted onto the ceiling and...
After a recommendation for decent cuttable LED tape, have been using enlite weatherproof (Can't remember where I bought my last reel?) but it has been a pain to join, looking for a tape and supplier, prefer 12v.
Hi All
Unbelievably I have never fitted LED tape and have always chosen LED battens.
I have an under cabinet approx 1.5m long, any recommendations for a make type or supplier gladly recieved along with any top tips for fitting.
Hi. I would really really appreciate help on this as I need advice please.
I am going to fit LED tape inside my sliding wardrobe doors so they come on from the 2 motion sensors when doors open.
I have bought 2 of the below motion sensors to be fit at each end of the wardrobe:
Mini PIR Infra...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc