Greetings.
I am new to this forum and I have a question regarding a relay that I am installing on a motorcycle wiring harness.
What I'm trying to do is install a momentary ignition switch, and the question is if the relay is connected correctly in this diagram.
Thanks in advance.
Hi all, the main horn on my Fiat Punto stopped working - went around the houses to fix it including the clockspring but to no avail. Now wired up a momentary switch running power from my electric windows.
Turn the car on, the windows work, press the horn and the horn works. Excellent. Press...
Hi I’m stumped and can usually figure it out after a while but not on this one. so I joined here In search of some help on my 05 tundra I’m putting an air horn on. It has two mini 12v compressors on it with two 30amp relays. 30 on relays going to air horns, 87 going to a fuse then battery, 86...
Hi,
Looking for a bit of advice on the correct type of switch. I have a sprung vending machine coin return pull, the end of the rod (inside the machine) needs to operate a 12v on/off momentary type switch. So when the lever is in its normal position, then end is pushing the switch in & it's...
Does anyone know of a manufacturer that makes a dummy dimmer module to sit in place of a dimmer behind the switch plate, like the Varilight MH0, but rather than an on/off switch, it’s a momentary/push switch (push to make)?
I know it’s an incredibly long shot but I’d be grateful if anyone has...
I have a humidity sensing exhaust fan in my bathroom. When the fan has power and senses humidity, it will run the fan until the humidity is removed. If you want to turn the fan on manually (in a stinky situation) you can switch the power off momentarily and then back on and it will run for a pre...
Is it possible to energize a contactor/relay from multiple toggle (not momentary) switches in a way similar to 3-way switches?
If so, what components and setup would do that?
The purpose is to control lighting from several sources and the reason for not using simple 3-way switches is that the...
Hi all.
Wondering if you guys can help me.
I'm creating a very simple motorcycle loom and have run into one area where I'm not 100% clear on what to do.
I have a remote triggered relay board which can trigger / switch 4 things.
The board is continuos feed, 12V and 20amp per output.
I have a...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc