My shower stopped working, As the light on the isolator switch wasn't coming on, I changed the switch. The new switch came on but was very dim? when i switched the shower on it never came on and the dim isolator switch went off anyone know whats going on?
Hi, after a bit of advice. Have tried a lot of plumbing and electrical shops but no one seems able to help. I have an Isolator/PSU 230v/12v. It is in line with an isolator switch and a fused on/off switch. All linked to a power shower (gravity fed). It can run off of normal mains with a 3 amp...
Hello, hello, long time listner, first time caller...
So, I have an issue in a house I'm trying to get ready to rent. The plumber has installed a power shower despite my asking him to install a mixer type. He's not gonna come back and fix it, and I havent paid for shower.
The issue I have is...
Hi All,
I hope you are doing well.
I am asking about the electrical wire. I am in the process of working on the floor across the 1st floor and while the decking is exposed I want to run a wire for future power shower. What wire should I use?
Thanks
Best regards
Hi All,
I hope you are doing well.
I keep having the issue with this pull cord switch to the power shower.
I used a number of pull cord switches 45A and 50A ones mostly from Screwfix but I think the problem is with the wiring.
As you can see on the picture the RED and BLACK twisted copper...
Hi had a 45amp shower pull cord switch melt on me so replaced it with a 50amp one did it all correctly but no joy and the switch doesn't come on or light up. Is it possible the shower itself has gone aswell.
Please help!
Hey,
What's the standard way a power shower is installed, I've done electric showers but not power shower before.
Also is a fan mandatory in a bathroom
We have an Aqualisa Aquastream shower, fed from a hotwater tank behind the wall. It's started to give a problem, the shower is still working but it does not give the pressure it used to give, there is no sound whereas before there was a buzz/hum when the shower was turned on. There is both hot...
Hi all,
I understand the wiring requirements for Electric showers that need 10mm2 cable.
I'm just not clear of the position with Power showers, specifically this Mira one:
http://www.mirashowers.co.uk/onlinecatalog/pdf/1079321_w2_d_mira_go_thermostatic_power_shower.pdf
The Mira spec says...
I am involved in a bathroom makeover, part of which is replacing the existing power shower with a like for like replacement (Mira Event XS manual). The shower is installed in a purpose built apartment block which is 20 years old. There is no RCD/RCBO installed in the supply to the shower. The...
I live in a house that was built in 1999. It had a Power Shower (pumped water from the tanks - not electric shower) fitted from new. We've had a couple of shower units where the motor in the shower has become either jammed or partially jammed, resulting in lots of noise and a little smoke on one...
Hi wonder if anyone can help me with some conflicting info I'm getting.
My daughter has recently had a triton belize power shower replaced by Triton appt engineer. This shower replaced a previous Triton shower several years old. No RCD was fitted to the circuit when the new shower was fitted...
Hey people
got a client and his triton biarritz 2 power shower has packed in
i know the solenoid packs up on these but the rest of the internals looks pretty poor
Is there any where I can get one of this new ? I can only find different models and I'd rather just have a direct replacement if...
Hi all,
I'm not an electrician but one of your customers doing some research so please go easy on me
I have a traditional (not a combi) boiler, with a hot water tank in my airing cupboard, and a cold water tank in the attic.
I have a power shower which makes a hell of a noise so I'm guessing...
Hello all. After several checking several sites, this is the one with the best setup. As you can tell im new with a problem with a power shower.
The shower unit is done by Gainborough link - Gainsborough Ambassador High Pressure Mixer Shower - Concealed
Sadly I don't know the brand of the...
Hi all,
I describe my plans, but i could be really wrong so please stop and advise me...
i live in a bungalow and got a standard electrical shower which i would love to change to a power shower.
i dont have any gas and got an old vented boiler installed, so i was looking for an instantaneous...
hi there
fitted a triton as200x power shower (gravity fed) today to replace exactly same model that was not working at all. Carried out initial testing on electrical circuit for minor works cert all well, isolated cold/hot water feeds from cold and hot water tanks, removed verey badly fitted...
Hi folks
Amateur here. Generally okay with basic electrics but a bit stumped with this one.
Today I tried to install a power shower. It's an aqualisa shower with the pump built in.
I was replacing a previous shower, which turned on/off via a pull chord, and replicated the wiring.
Strange...
Morning gents. Just want something cleared up so I know whether it's me or the plumber that needs to go out.
Customer last Friday had both myself and the plumber in last week, I was rewiring immersion circuits, plumber was laying bathroom floor and raising the toilet to fit it in. So last...
This is my first post in these forums and I hope that someone can help me
My power shower has packed up and I ideally want to fit an electric one instead, I can do all the plumbing no problem but I've looked at the wiring and what I've got is: 2.5mm twin and earth coming from the shower in to...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc