hi I have a Fantronix aerium midi modern heat recovery unit that i want to wire up. would you be able to run the cables from a fused switch that is a spur from a ring main. any advice appreciated all work i complete will be checked by a qualified electrician. thanks
I have absolutely zero experience with MVHR.
The issue I have in my own home is as follows.
Log fired burner in kitchen supplies hot water and heating via a thermal bank / store. Approx 2kw to the room and 9kw to the water.
If we want the heating on then this is on, combined with all the...
I am about to quote to install this HRU. Having never fitted one before I had a few questions?
1. How long roughly does it take to install? The 162mm diameter hole will already have been drilled. There is a socket very close by and it will be in trunking, so easy. It's more the length of time...
Anyone have experience with heat recovery bathroom fans?
I want one for home, old House with no cavity walls, bathroom moisture condenses on wall and causes mould.
I do the normal, leave doors and window open but it is not enough.
if anyone can recommend a good one then it would be greatly...
I’ve purchased a single room unit to extract air from the bathroom, it will pass it through a heat exchanger and exhaust outside.
In parallel, air is drawn from outside, through the heat exchanger and slightly warmed before vented through the ceiling of the landing/stairwell - there have been...
Need to fit one of these (xpelair xhr150) but the only external wall space i can core through is below the window.
Would this be ok??
i.e will it remove the damp if its running at low level
Hi! I'm installing some interlinked smoke/heat alarms. The customer wants it so that when the alarms are activated it cuts off the power supply to his heat recovery ventilation system (so it doesn't keep trying to replace the smoke with clean air, which would effectively be fanning the fire!)...
Hi people, I was hoping someone could shed some light...
Is it possible to acquire one of these Kenwood systems independently? I have a customer who has been quoted 200 of her hard earned English pounds just for someone to have a look, no guarantees to solve problem (without spending more, of...
Been sat in the spare room for nearly 6months now, to say no longer needed wouldnt be right because it has never been needed.
As in the title brand new in the box with manual, still has the plasic cover on the plugtop.
These are selling on fleabay new for between £900 & £1100 from what i can...
Sadly we've all been there.
I've been chasing a debt for three months, I've sent several invoices, knocked on the door, left phone messages, text messages, nothing.
I've never used a debt recovery firm before but I looked them up on Yell. com, picked one close by that looked professional...
I was wondering if any of you guys ever fitted a heat recovery fan. Does anyvody rate them as doing the job they are supposed to do. I am considering fitting one in my bathroom next year.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc