I have a small family farm and would like a sounder to notify when folk need to come to the office.
I've seen this 230v Aico Y03 Multi Frequency Sounder.
Can I attach to plug and just switch on when needed to activate?
Details are
Type A100
Code A100AC230R
Voltage ⚡ 230v AC 50/60HZ +/-10%...
Where os the battery backup for the siren?
I have ordered a Yale wireless system to replace the current old and faulty Accenta G3. I know that the G3 system has a feature whereby if the power is cut the siren goes off.. When I install the Yale system I want to disconnect the mains power...
Hi All
I'm thinking of installing a CCTV wifi camera at the front of my house. I would prefer for it to be wired and was wondering as I have my wired Swann house siren box on the wall close to where I would like the camera to go whether it would be possible to run an electricity cable to power...
This is something I have never come across before even though I have installed a good few alarm systems in my time as a DIYer.
I know it is a cheapo alarm but it shouldn't be any different. It came with a little siren and about two feet of flex, black and red two core. I intended to put in to...
Hi, I have an Accenta G4 8SP399A with a single LCD keypad.
Everything seems to be working correctly other than the external bell doesn't sound when the alarm is triggered, the strobe lights do light up though.
If I do a bell test via the engineers menu the external bell does sound.
Would...
Looking some advice on wiring a siren through a timer to alert everyone to the conveyor belt running. They don't want it to delay the belts starting (stupid idea) they just want it to sound when the belt starts up as it's unguarded. I'm wiring it off a n/o contact on the push button. I'm trying...
Hi
I have a really old Yale HSA-2500 burglar alarm installed in my house but I am having an issue with my external siren. It seems to be going off but the sound is a very muffled froggy type of a noise. My system seems to set ok (although one of my PIR's seems to have died and doesn't trigger...
Picked up an eBay police siren to replace my stock horn. It has 5 different tones but I only wanted the air horn sound so I glued that button down and hid the controller. I cut the stock horn wires and plugged them straight into the siren so when I hit the horn it powers the siren and since the...
Hi,
I originally had this post:
http://www.electriciansforums.co.uk/electrical-forum-general-electrical-forum/71644-connect-2nd-siren-box-7.html
to add a 2nd siren box. I am trying to add a gsm auto dialler, but the issue i have now is that the voltage on BELL +- and STROBE +- does not change...
I Have a little question not sure which way is correct see images
I need the coil to be switched when power is supplied from the controller to the motor switch. The relay will be switching a 24v DC feed to a Warning Beacon & Siren.
Not sure because controller doesn't have a N output weather...
Hi all,
I wish to disconnect an internal alarm siren but I am not sure how to go about doing it. You will see from a previous post that i've dabbled with the alarm before. It belongs to my parents and to reassure you, I have my 17th Edition, Part P and 2392 Inspection and Testing, although I...
Hi,
I have 1 front siren box and am considering connecting a second siren box at the rear. Can i feed a wire from the current siren box terminals to feed the new 2nd siren box?
Thanks.
Hi folks
is there anything on the british market like this?
circuitsiren.com
i do eicr's on a regular basis and invariably i'm on my own. next week im starting a huge job testing the county council offices, at night, which will take 6 months!!
not a single circuit in the entire building is...
evening all,
ive been asked to fit a bell for warehouse. I went to wholesaler and they gave me a fire alarm bell which runs on 24volts and a chunky 12 volt transfomer. I rigged it up temporarily and it didnt sound that great.
Is it bettter i use a 24 volt tranny
or
can anyome reccomend a...
Hi all,
My BMW manufacture siren did stop working and as a result I bought an aftermarket siren which comes with a backup battery. The new siren has 4 wires, black(negative), red(Positive), Blue and White trigger negative and positive accordingly.
However my siren wiring is 5 which are brown...
I bought a siren like this one in the video and don't know how should I wire it
(link removed)
I have a red , black, white and blue .... red and black are positive and ground and the others are Alarm Trigger + and - , I wired the red one and the white one (trigger + ) to the alarm white ...
Hi Guys
New to the forum. I was wondering if there is anything special I need to do to remove a ADP Alarm system someone has asked me to remove, Never really worked n alarms systems before so any advice would be greatly appreciated
Cheers
Tickover
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc