stainless steel

stainless steel

You will need 50 posts under your account before joining in with this thread because you can't link out without 50 posts first.

  1. A

    which drilling bits for stainless steel?

    I will start my own workshop and therefore trying to know about all the tools i need for an ideal working environment. In my little journey this is what I’ve understood “Right tools for the right materials can help solving a lot of problems” I am looking for special bits for effectively...
  2. happysteve

    Cutting neat notches in a stainless steel cooker hood chimney

    Eh up :) Is it possible to cut a neat notch - say arch shaped, with the arch diameter about 25mm - in a stainless steel cooker hood chimney, without either making a mess of the chimney, or breaking/burning out tools, or both? Special hole saw - or maybe regular holesaw used for steel - and...
  3. rsgaz

    Best tool for cutting(removing) stainless steel cable ties.

    Hi all, Just to be clear, this is not for cutting off the excess when installing stainless ties, I already have the Partex tool for that. I mean removing them at a later date, and not damaging the existing cables. Aviation snips are no good, you can't get the jaws in far enough to where it...
  4. S

    Bronze screws in stainless steel

    I'm installing stainless steel sockets in my new house and I'm wanting some contrasting bronze screws. I've installed stainless steel screws into bronze fittings before, and I really like the contrast. However, I don't want the screws to be a dirty brass colour, I'm wanting a bright, shiny...
  5. W

    Stainless Steel 20mm Conduit

    Hello, Got some stainless conduit to do in the next few weeks, I was wondering anyone with experience with this... I mean have you used your normal stock and die for threading? Maybe a fresh die if its getting a bit old in the tooth? Plenty of cutting compound of course, was just wondering...
  6. B

    Bonding Stainless Steel Tables In A Kitchen

    Wiring for a new kitchen,client is having all new stainless steel tables,have these all got to be bonded.If yes what size earth cable do you suggest. Regards
  7. S

    Earthing Stainless Steel Bench?

    I have been asked to 'earth' a metal/stainless steel bench inside a workshop. The bench is used with hand tools and power tools - there is a socket directly above it where power tools being used are plugged in to. Also staff are complaining of receiving static shocks when touching the bench...
  8. vxwestie

    Stainless steel surface sockets

    Im looking for a quanity of surface metalclad dual sockets with conduit entries, but in stainless steel. Can anyone point me in the right direction?
  9. telectrix

    stainless steel

    something that has been bothering me for some time now. stainless steel is steel with approx. 7% -10% of chromium added to make it rust resistant, this is due to the chromium producing a molecularly bonded chromium oxide coat. al this i understand. what i can't get my head round is that it is...
  10. J

    Best Hole Saws For Cutting Stainless Steel

    Hi guys, Quick question, I am looking for a hole saw that will will cut stainless steel again and again? For example, don't want to cut it once and not be able to use the hole saw again? Also, how much do these types of hole saws tend to cost? Thanks :-)
  11. Z

    Best drill bits for metal and stainless steel?

    Hi guys, I am sick of buying cheap or expensive drill bits which only last for a couple of drills. What do you think which exact make or model is the best and lasts longest?
  12. J

    Stainless steel contacts?

    I was given some audio plugs purchased by a friend from maplin with which to repair an audio system here at sea. No matter what temperature I achieved on the plug the solder wouldn't take (yes I burnt out the nylon in the wire). I had a closer look. It's stainless steel. How would standard...
  13. A

    Stainless Steel Sockets

    Hi, I have a load of stainless steel sockets (white insert, black insert and black insert with metal rockers) which I inherited from a bankrupt customer!!! I am now selling this individually at approx 25% of the original retail (e.g double sockets are £4.25 each) and a similar unit on...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top