I've always thought I was quite good a wiring heating systems, I can do Y plan, S plan, UFH set ups, "normal" thermal stores etc, you name it and I can do it and have done for years.
However this system opened my eyes today, the thermal stores I have done in the past have had a coil that...
Any issues with wiring lighting in 4core flex rather than 3core and earth?
Approximately 50 LED panels to wire all fitting into a suspended ceiling.
I know some lighting design/manufacturing companies sell plug and play style fittings and wiring which I think may be H05.
Is there a great deal...
I'm considering buying a home battery storage solution and read that with 3kWh feed you can only charge 12kW during the 4 hour Octopus Go off-peak window, which makes sense.
Is it the mains supply, battery or inverter that bottlenecks this 3kWh? I've read some batteries (or was it inverters?!)...
I have searched online, have a few ideas, but I'm getting old...
Basically, I have a bin store which has light on the ceiling...you can use the switch to put the light on, but only when the entrance lights are on...they are on a Sangamo timer.
I can easily lead a permanent feed to the bin...
So spent most of the morning sorting my stuff out, I have several of those multi compartment clip boxes already absolutely rammed full of screws , grommets , clips , cleats , saddles etc
and also a plastic crate full to the brim with stuff like boxes , mcbs , glands etc
any better solutions ??
Hi hoping for some help here, I turned off my boiler over xmas, came back turned it on and now it's no longer heating the store.
I've checked both off peak and boost, neither are warming, I've checked and tried to reset both thermostats on both elements, but they both seemed like they didn't...
Hello, new guy here and I'm not sure of correct section or even correct forum for this question. At a local thrift store I purchased a Warrick 1d1d0 relay, looked interesting for a dollar. I play with home electric power and it looked interesting. Any way the input is 115v and the output is...
Why can’t I find the NICEIC online certification APP on my APP store anymore? Has it been taken over by the Clik APP now? I can’t find any info on the websites giving clear guidance. Frustrating!
You know the ones,bolts attached to the back,fit the front,then fiddle with the dome nuts.
Bottom entry,you don’t have achance &1.5 mm cables,I nearly smashed it to bits.
Hi guys (and gals)
I hope you can help me. Will try to keep it fairly brief! :grin:
Have a Torrent ECO with woodburner downstairs, so gravity. All working well for the past year, apart from rads getting hot then cool (as the water gets pushed round the system) so instead of standing with my...
Looking for some advice on rectifying someone’s heating system. The system was working but when it stopped working the sparkie who came to fix it messed about with loads of the wiring now it’s not working great. I’m going to look at it to try & get it going correctly tomorrow so just want to be...
I've got a load of old stock in my stores that's no good to me if anyone is interested:
- 22 Lengths of basket 135mm x 35mm
- 9 x Flex 7 Connectors
- 50m drum 1mm 4core heat resistant flex
- 50m drum 16mm blue single
- 3 x 100m drums of 2.5mm grey single
- 2 x 100m drums of 4mm black single
- 3...
Here's a beauty! I overheard this in a store that sells electrical materials as well as lots of other things (not b&q!!)
Customer to assistant:"Don't I have to notify the council when I do wiring to make sure I've complied with the regulations or something"?
Assistant:"Oh no, that only applies...
I contacted Solarcity about purchasing a Battery and Inverter, they rejected my approach saying they are not willing to sell to a non-American.I particularly like their compact , concise design.
I came across this Germany company with a 30 year guarantee of their product at £11k ...
Are dry ceramic wall heaters a modern version of storage heaters, i've just got an old cottage that i'm going to renovate, it has old storage heaters in each room aswell as an open fire (coal type).
There's no gas supply to the area as it's in the country and i didn't want to go down the route...
Hi everyone. Hoping someone can help. I'm using a recently qualified electrician to carry out the following work but he wants me to tell him what I want and supply parts for wiring to lpg boiler/thermal store. I would like to have two pipe thermostats on flow and return to store (as close as...
We have a convenience store and are having a new suspended ceiling installed but we are also having 16 light fittings installed. I believe the wiring is okay and I think we will be going for LED fittings. I just wondered if anyone can advise on the price roughly just so I have an idea.
I've fitted a 300ltr thermal store a year ago and have just recently added solar water heating evacuated tubes. What I'm wanting you do next is get the stats to turn on the rads when the water achieves 65c. As the water from the rads returns it lowers the temp to around 45c while the fire is...
Hey there all. I'm after some Heatmiser neoair kits and found this website. UnderfloorStore.co.uk
I've got a page with The Underfloor heating Store open but the above website is slightly cheaper. Anyone used them before?
Hi guys,
Recently doing a EICR in a commercial high street store. In the store area were they a false celing, they is cable drops down the wall and behind shelving. You only see maybe 200mm of the cable as the shelving is high near the ceiling. the cables are twin and earth and FP200, not...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc