stove

Recent contents Top users
  1. HappyHippyDad

    Metal blanking plate to protect from wood burner stove?

    My customer is having a wood burner installed. The stove installers have said he needs to get the 2 sockets that are directly behind the new stove position removed. They are approx 9-12" away (guess). It would be a right pain and expensive for the customer to have the cable removed from the...
  2. Oliver123

    UK Baby Belling stove 1972 tripping power when getting warm.

    Hi, I want to restore an old baby belling stove/oven and it worked at first but after about 1min it tripped the power. After that, it trips the power immediately when trying to turn on. The two elements on the stove did this, the grill and even the oven. What is weird is that when I leave it for...
  3. I

    1 or 2 junction boxes for induction stove top and wall oven?

    We are renovating our kitchen, and part of the renovation involves replacing our gas oven with an induction stovetop built into the counter and a wall oven built into the cabinet below. I have added two breakers to the panel and run romex from each one to the kitchen area, creating one dedicated...
  4. O

    Multi-fuel boiler stove connected to existing heating system using a relay

    Hi all, first of all I'm not a sparks so forgive my ignorance. We are currently getting a boiler stove installed. This involves connecting the plumbing and some electrical to our existing heating system. The Plumber has requested that our electrician installs a spur at the location of the...
  5. F

    6 Inch Solid Stove Plate Wiring

    I have a Salton Mini Oven with one 8 inch and one 6 inch solid plates. The 6 inch plate has stopped working and I went and got a new plate from ARB today but when I got home, I realized the new plate has 4 connecters numbered 1, 2, 4, 3 where the old one only had 2 (Live and Neutral). I assume...
  6. E

    Will my outdoor 240 V sauna stove work with a 200 ft 8/3 wire?

    Hi I'd like to install a 240 volt single phase sauna stove at a distance of about 200 ft from my main panel. The main panel has a 40 amp GFI breaker and an 8/3 exterior wire that goes into a sub panel in my workshop. The 8/3 is inside of a black 1" pvc 50 ft long flexible water pipe. I'd like...
  7. N

    Glass Top Stove Inside a Drawer?

    Is it possible to install a glass top electric stove inside a drawer, whereby the stove is only in use when the drawer is pulled out?
  8. G

    Making a DIY electric burner and stove

    Hey guys! Very amateurish electrician here. I just finished watching a video of a guy making an electric burner and stove, using just a can, screws and wires: View: https://www.youtube.com/watch?v=2nIMuurFog0 He plugged the thing to a 12V battery to heat the setup, however, since most...
  9. O

    ESSE 990 Electric Stove ..

    Got one of these to install shortly ........ what caught my eye when I read the spec was: "The controls for ovens and hobs are neatly housed behind the upper left door. And, of course, with no flue needed, your 990 EL can be positioned wherever you want, provided there’s a 2 x 13amp power...
  10. S

    Woodburning stove heating system

    I have been asked to wire up a heating system for someone, never done this kind before as nearly every man & his dog has gas or oil boilers these days apart from my client who seems to be going back in time! He has a woodburning stove which he is going to use to heat the radiators in the house...
  11. N

    socket getting warm due to a wood stove

    Hi all, I've recently had a wood burner installed in my lounge. The stove flue goes up through a liner installed inside the original masonry chimney. I've noticed, if the stove is burnt for several hours, the chimney breast warms up a bit. In the bedroom above the lounge there is a double...
    • NeilN
    • Thread
    • cable chimney double getting probably socket stove warm
    • Replies: 2
    • Forum: DIY Electrical Advice
  12. M

    Light and power outlet in wood stove fireplace.

    What is the guidance for fitting lighting or power outlet in a fireplace fitted with a wood burning stove? I want to fit background lighting and a ventilation fan to circulate the warmth into the room. Are there special heat resistant fittings? Are specific distances involved? Or are the...
  13. H

    S Plan with Stove + Controls

    I'm after a bit of advice from you heating engineer experts. I have wired many boilers previously but never to include a wood burner I have been asked to wire an S plan heating system, no problem with this. They have also installed a wood burner with a gravity rad and twin coil cylinder...
  14. S

    Spot light install above a pot belly stove

    Has any one installed spots lights above a pot belly stove ,my fear is the heat will affect the led spots and even to a certain degree the cables may get affected above the ceiling Im installing a small mf ceiling to allow for spots I have attached a pic of setup minus mf celing which I will...
    • steviethespark
    • Thread
    • bell cables ceiling install light spot light spots stove temperature
    • Replies: 3
    • Forum: UK Electrical Forum
  15. K

    Wiring diagram for a combined dunsley stove and gas boiler system.

    I've been asked to wire a heating system which I havent done before. Plumber a bit vague in how its all supposed to work. Don't even think he knows!! It incorporates a dunsley baker log burner stove and condensing system boiler. It's a gravity fed hot water tank with a neutralizer...
    • krissiboy
    • Thread
    • boiler combined cylinder diagram electricians' talk gas gas boiler heating stove system water wiring wiring diagram
    • Replies: 2
    • Forum: Central Heating Systems
  16. P

    wood burning stove

    anyone know of a good place to buy a half decent wood burning stove? would like to get one with a cat on for a customer
  17. M

    Installing a light in a customers chimney (above multifuel stove)

    Sorry if this is a simple question but i have been asked to install a light fitting in a chimney above a multi fuel stove. They have a stove with the flue pipe leaving the top, then it goes up through a register plate which blanks off the bottom of the chimney. They have had a switched spur...
    • matt_h
    • Thread
    • aus behind chimney customer customers electricians' talk fitting installing light plate possible stove
    • Replies: 1
    • Forum: Australia
  18. D

    Stove Plate Slow

    Hi, I have an electrical stove with solid plates, all plates are with the big red dot in the middle. The stove is about 20 years old. Now I have changed all the plates, but it is still super slow. It does not heat up in 30 minutes, so it is not really usable. Do you have any ideas why it...
Best EV Chargers
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top