What fittings are people using for replacing fluorescent strip lights? Looking for something with bulbs that customer can change rather than integrated? There are obviously plenty of led tube options but surely there must be something smaller/less bulky?
Hi all, I have a couple of questions I'm hoping you can help with.
I have put a solar panel on my kids play house which charges a 12v battery. I have so far wired 3 lights and everything works great. I wanted to add an LED strip light in the understanding that they only require 12v. I bought...
I have three Aurora Fluorescent linkable (linked) under cabinet 'strip' lights (c.21cm each) under the kitchen cabinets and over the sink area (but not directly above) put in by the builders in 2006 when it was built.
The middle Aurora strip light has failed and needs replacing - the Aurora...
I am currently looking to add 12v led cob strip lights to my mother's kitchen but confused what I need. There are currently mains wires under the wall units for the strip lights to connect to but when I measure the voltage with a multimeter it recording as 12v AC max, from what I can see online...
Wanting to add 2 strips of led lights down each side of underneath of the stairs,
I have a socket I can spur off, into a fused switch, been looking at angle profile, so light is better, so ideally I need a LED driver, some led strips, and a way to connect them, happy to wire/solder something...
Hi all, I'm looking to tap into all the experience out there relating to the installation of outdoor LED strip lighting. I have a customer who would like this fitted under a capping stone on a low wall that surrounds his lawn and searching the web there are obviously many companies who can...
Hi guys just a quick one,
Is it acceptable to use LED strip lights in a hot kitchen or would the fluorescent tubes be more suited for the hot environment??
Thanks
Hi, I bought my daughter some LED strip lights that she wanted to go around her bed. The bloody cat has bitten them which I’ve taken a photo of. Just wondered if anyone can tell me if I can replace that cable part or repair in some way. It’s where my little finger is. I’ve put pic of the ones we...
Hi, firstly thank you for you forum, as a newbie to auto electrics this forum has been really informative.
im converting a Renault Trafic into a day camper and I’m looking to replace the OEM internal cabin lights that come on automatically when opening the van side or rear doors in what would...
I want to do some strip LED lighting around the house. I recently bought 5m Grovee strip LED (£20 amazon) and I am impressed with the choice of colours/white available with it, but it is expensive. I and have some left over and want to figure out how I can use this without the Grovee...
Have three spot lights in wardrobe.
Wired back to switch.
Wanted to take out the three spots and replace with one strip light.
The strip light is currently wired with a figure of 8 lead to a plug. 2.5/250 would it be correct to be able to strip off plug and wire this to where it current wires...
Hi, new member here seeking a bit of advice.
I want to run 4 x 5 meter addressable RGB LED stips around my living room skirting to form a continuous 20 meter strip -don't judge me lol. The LEDS will be controlled by a NodeMCU flashed with WLED and powered by a 5V 12A 60W psu. All 4 strips will...
Hi, can anyone recommend the best but not so expensive LED Strip light kit and where is best to purchase from please. Installation environment is in a kitchen on the edge of a plinth (straight run), the next is to cover two cupboards that are separate from each other but has no pelmet. Would...
Hi quick question, I need to removed some LED tape lights I fitted under my kitchen cabinets a while ago in order to fit some profiles. The adhesive they originally came with is not sticky enough to reattach them. Does anyone have any suggestions what to use?
Thanks in advance
Graeme
Excuse a basic question. But just wondering on people's suggestions for installing LED strip lights under cabinets attached. On both the left and right cabinets there is an existing light. Guy wants replaced with strip lights. There will be three sections, one for left side and two for right...
A client asked me to fit some LED strip lights, 1m long, easy enough, they bought them, probably on Amazon, 3 pin plug with 6 inches of wire and then a very small plastic enclosure about the size of a switch, then another 6 inches of wire directly into the strip lighting. I needed to extend the...
Hi guys
Doing my kitchen and want to put the led strips under the cabinets and also the kick boards. Any recommendations for any? The one for the kick boards would need to fit round a u shape so would ideally be flexible to bend round.
Cheers guys
Hi everyone I'm new to this forum, I was looking at a flat the other day which is beautiful, apart from these lights in the kitchen? , and for such a modern flat I don't understand why they were put in in the first place and also why they are not centred and why is there a lonesome pendant light...
Looking for info on led strip lighting on ceilings with the coving profiles. How would you hide the driver and the cable to the strip light. Would you have the driver above ceiling and just chase the cable from driver to led strip into the wall so it comes out of the wall above the coving.
I'm...
hi
Wonder if anyone could give me a bit of advice. I have taken out my old fluorescent lights from under my cabinets and I'm replacing them with low wattage led strip lights. I have 2 in total. I have my mains supply cable which comes from my Light Switch and this cable runs to under my first...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc