turned off

turned off

Recent contents View information Top users
  1. R

    I turned off the circuit breaker for the foyer and the doorbell light went off but the doorbell transformer stayed on. Is this possible?

    I turned off the circuit breaker for the foyer and the doorbell light went off but the doorbell transformer stayed on. Is this possible?
  2. J

    CH Thermostat indicator lit when turned off

    Hello I have a central heating system, with a Y plan layout. The neon indicator on the thermostat seems to be sometimes dimly lit / flickering even when the thermostat is turned off. I measure approx 50V AC across terminals 2&3 of the thermostat when it is happening. I have narrowed it down...
  3. Phyllis

    RCD tripping when socket is turned OFF

    Hi, No electrician background here, so novice question! I have a new (<6 months) plug socket that whenever I switch it OFF it trips the RCD on the fuse box. I’d previously had an issue with the RCD and ‘socket’ switch tripping (all sockets are on one switch on the fuse box) which was traced to...
  4. Davew182

    Why would an RCD trip 3-4 minutes after a light has been turned off?

    No lighting has been changed in the house for at least 12 months. Last night a small pop similar to that of a small firework in the distance came from one of the rooms in my house and the rcd for the front of the house ceiling lights tripped. This happened within a few minutes of me turning off...
  5. D

    Why do my led lights glow when turned off

    I have 13 LED lights that glow all night. They are on two separate breakers
  6. C

    Sky digibox rf2 output - power to magic eye option to be turned off by sky firmware ?

    "Hello All", I wondered if anyone else has heard the RUMOUR that Sky are going to broadcast a Firmware Update around September which will have the `accidental effect` of removing the Set Up Option within the Engineers Set Up Menu to turn Power ON to the Digi-box RF2 Output / Remote Control...
  7. S

    Rcd tripping when lights turned off

    Have been to check site where consumer unit with 5 circuits. 4 of those circuits feed various light and sockets in one stable barn with a lot of flourecent strip lights and outdoor school flood lights. The 5th circuit is on 16A mcb and feeds a second consumer unit via armoured cable in a second...
  8. B

    Meter running backwards AFTER PV turned off

    Had a customer who's meter has been running backwards - then when British Gas came to change over the meter he turned off the panels and the isolator switch by his fuse box. The meter was still running backwards albeit slowly even after it had all been turned off so British Gas refused to change...
  9. B

    Voltage at light fitting that is turned off

    Hello, I need some advice, I have wired and fitted 2x down lights with 7w Kosnic LED lamps. These are switched from 3 positions. They are on a circuit suppling 13 other down lights all with LED lamps. (All the wiring is new as it's a renovated house, which I've wired). Now testing the...
  10. M

    mcb trips when downlights are turned off

    HI Guys I've had a call back to a job. It seems that a 6A light circuit mbc trips when some kitchen downlights are turned off and occasionally on. Its an intermittent fault. I replaced a light switch on this part of a circuit and looked a a poor contact on a 12v fitting (its a return to fit...
  11. E

    Motor Keeps going after it's turned off.

    Newman 3 phase induction motor (Bradbury liftmaster MK1) on a four post ramp - . When the ramp is raised it sometimes keeps going - bloke says he can't switch it off by regular switch - has to do it at the main isolator. I haven't been there yet, any ideas?
  12. ringer

    I turned off stats - how do I turn them back on?

    Think it's called stats -at bottom of main forum page, shows top posters, latest posts etc. I only turned it off to see what would happen - a message flashed up telling me how to turn it back on, but the message only lasted for about 1 second so I couldn't read the complete instruction! Help...
  13. N

    lights dim when turned off

    Hi, I have been called back to a job where a 3-halogen lamp fitting with 2 way switching keeps blowing a bulb. When this happens and the switch is turned off the remaining 2 lamps stay on but very dim. When the blown lamp is replaced, all is well again. I have tried everything. Isolated it...
  14. J

    turned off lights circuit now kitchen lights won't work

    just turned off light circuit to undo some lights in lounge turned circuit back on now we have no lights in kitchen have two light switches one for ceiling haogen lights and one for cupboard lights none will work help needed also 3 bedrooms won't work now checked whole house so all that are...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top