Looking for an outdoor centre off switch (not retractive) and find myself short on options.
I have a lot of Gewiss enclosures to which a centre off switch can be fitted, but would prefer to avoid those clear membrane covers that will eventually leak.
Other switches used for this will be...
Hi guys
I installed this unit protecting a shed for a customer a while back and he’s text me with images showing the fuse burnt and it’s holder melted. All connections are tight and no moisture inside.
Any ideas why?
Also I’m hoping to replace this spur with a more reputable brand within its...
Hello. I am thinking of fitting an outside weatherproof socket unit. I will run the cable back through the wall via a surface mounted box to a kitchen socket where it will be plugged in with a 13 amp fuse. I will use 2.5mm square cable and trunking. The kitchen socket is already covered by...
Hi,
I bought 4 weatherproof led strips that I am going to connect together. They have a connection already in place to connect, but it doesn't look weatherproof. How would I make the connections to be weather tight?
A range of weatherproof outdoor switches with a choice to install either our 10AX MiniGrid or 20AX GridPro Modules.
Building on Scolmore’s reputation for supplying quick and flexible solutions, the IP66 rated weatherproof socket and switch enclosures offer users a single fix installation - with...
Can anybody tell me where I can find this product as PVC or if anybody makes a PVC version?
View: https://www.amazon.com/Hubbell-Bell-5407-0-Weatherproof-Extension-32-Inch/dp/B003A44Z3G
Recommendations welcomed for plastic weatherproof consumer unit, not going to be directly exposed to rain but under a sort of canopy. Ive used gewis enclosures, just wondered if there was a better make, there will be 4/5 small ish swa’s entering the enclosure.
Thanks
I am looking for a weatherproof timer to switch a 2 gang socket on/off.
I can find plenty of single sockets that incorporate a timer but I cannot find one with with 2 sockets, or just a separate weatherproof timer (suitable for sockets, 16A) that I could then use to switch a standard 2 gang...
Hi
Does anyone know of a weatherproof simple on/off timeswitch and Switched Spur thats available? Its going to be undercover, so not in direct contact with rain/sun etc but there will be moisture.
Thanks
I have just fitted a BG 2gang weatherproof switch.
At present only 1 of the gangs is in use to switch 5 x 200w LED floodlights.
I used 6mm 3 core SWA as it was a long run from the CU and Voltage drop forced the larger cable.
I only just got 2 x 6mm cables into the 2gang switch. In a year...
Hi,
I'm looking to have a weatherfproof socket https://www.electricalcounter.co.uk/products/Switches+%26+Sockets/Weatherproof+Accessories/Nexus+Storm+IP66/Outdoor+Weatherproof+Unswitched+Double+Socket+13+Amp+IP66/1977877864
connected via a plug to the mains, it has to go 30 metres to an outdoor...
I'm sure I once saw a weatherproof 3 gang switch which looks like (or was) the BG ones in this link IP66 20A Switch 2 Gang 2 Way SP - https://www.toolstation.com/shop/Electrical/d190/IP66+Rated/sd3138/IP66+20A+Switch/p24607
but I cant find them! Was I imagining it??
Hi,
This is for a boat with 12V electrics, so most parts are similar to auto electrics. For a new engine control panel I'm looking for two push buttons, both need to be two pole changeover. Does anyone have any suggested sources?
FYI this is to replicate the design that some manufacturer's...
Got a 2 gang weatherproof socket to fit soon. Wondering what makes people would suggest? The house is quarter of mile from the sea so gets wind rain and everything else thrown at it!
Was looking at the MK masterseal- anybody use them much? worth the pennies?!
thanks.
I need to fix up an external connection point for a 32A, 240v industrial socket (the blue round 3 pin type).. Ive not worked with these before...
what is the best way to do this, is there a proprietary weatherproof item, like a caravan hook up point, or would a little cupboard need to be...
Quite often I see conduit going into an adaptable box or conduit box 'outside'. This is fine if it is coming in from the bottom, you can just use a normal adaptor to go into the box, but often it comes in from the side and the adaptors are not IP rated.
I just wondered if anyone here uses...
I have had little experience with using swa, so if anyone out there could advise on a good adapt.box or junction box that allows for rear entry (phnaar), and if I should be using 2 core or three core swa ( I realise the armour is to be earthed even if I don't use it as CPC) as not sure if using...
As the title suggests, would you class this as a permanent or temporary structure?
Quick overview. End of terraced property, UPVC roof fitted and sealed with flashing etc to the building structure. Other side of roof attached to 6 foot wall, mainly brick with pillars roughly 3000mm apart with...
Screwfix stock this gear, and Im in the process of sourcing a bit of outdoor gear for a client..
Anybody used it or had experience one way or the other..
I suspect its a lot cheaper than MK gear for a reason..!!
Hi Guys
I fit a lot of IPX5 and IPX6 accessories and wonder if I should be drilling a drain hole at the spot that's usually indicated. Most have instructions that have no guidance except to say that the IP rating will be compromised if you drill a drain hole.
However the instructions with a make...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc