A question if I may before I dive in.
I have an old gravity fed CH system which thanks to members here in the past - works very well.
It has a Danfoss Randal 3060 programmer that has died.
I have the original installation docs for the programmer - and it shows 7 terminals plus the earth.
In the...
Morning All,
I am currently involved in a project for 2 under pavement vaults both have been stripped out to allow for full tanking (wall and ceilings). The damp company have said the client cannot penetrate the surface once the works are complete otherwise the guarantee is void.
We need...
I want to do the following:
There are 2 separate supply circuits in the flat. One is Normal tariff which is available all the time. The other is Economy 7 tariff which is only available between midnight and 7am.
I want to wire a socket so that when Economy 7 is available it draws power...
Hi all: total diyer here. First post. I have a four gang switch box (15 amp). I want to replace three standard switches with three wifi enabled switches but am concerned that I have to put in an increased sized four gang box due to capacity limitations on this standard size four gang box that...
Okay, so, I’m currently working towards becoming an electrician and was after some guidance for a job that I’m working on.
The property (a small flat) has a few circuits on RCBOs.
1 Ring (kitchen)
1 Radial Sockets
1 Internal Lighting
1 External Lighting
The owner occupier is replacing their...
Hi. I am not an electrician. After some advice. I am changing a light switch in my house from a single on/off switch to a dimmer switch. When removing the old switch, there are 3 of each wire. 3 blue, 3 brown and 3 earth. The dimmer switch has 3 connections. L1, L2 and an arrow with a wavy line...
Hi all,
I recently bought and moved into a house and set about changing all the halogen bulbs with 4W non-dimmable LED bulbs. Upon doing so I discovered that when I switch the bathroom lights off at the wall, instead of going off they just become about half as bright as they are with the wall...
Hi, I recently bought 2 lamps from eBay, when they arrived they had European plugs, when rewiring the plugs to UK plugs I noticed the wiring is only 2 gauge and has no earth. This concerns me as the casing for the lamp is made from eBay appears to be metal/ brass! Also there is a what looks to...
Hi,
I'd be very grateful for any advice/views available please on the electrical set-up in a ground-floor maisonette that we are in the early stages of purchasing, our offer having been accepted.
We went to the property today to inspect a few things, and noticed a lot of electrical wires/boxes...
Help! I’ve recently bought a second hand Dimplex DUO 500i storage heater.
Can anyone tell me where the three wires in the picture are wired to?
This board is on the front panel convection heater.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc