2 Gang (1 x Intermediate 1 x 2 way) Light Switch | on ElectriciansForums

Discuss 2 Gang (1 x Intermediate 1 x 2 way) Light Switch in the Lighting Forum area at ElectriciansForums.net

mech_trk

DIY
Joined
Apr 16, 2020
Messages
4
Reaction score
0
Location
UK
Hi,

Sotty if this is a repetative post but I could not find anything similar to my question anywhere on this forum.

I need a 2 Gang switch with 1 x Intermediate & 1x 2 Way. I have serached a lot on the internet but had no joy!

Can anyone advise where I can find a cheap plastic one, please?

Thanks
 
try the click modular swutches. you fit whatever switches you like into a 2 gang, 3 gang, 4 gang faceplate:
 
Click "Mode" i usually just buy intermediate switches and swap a module over and use 1g2w somewhere else. But you can buy the module separately as well.
The problem is I hae already fitted 2 additional switches at either end of the hallway and pulled the wires through the ceiling:sweat: and connected them all to the existing 2-Gang (2 x 2-Way) switch in the middle! and then relised that I needed an 'Intermediate switch' instead! so I need to replaces the existing switch with a 2Gang (Intermediate + 2Way) instead.
 
that's exactly what you can do with the click modular range. buy a 2 gang switch plus an intermediate module and swap out 1 of the switches for intermediate.
 


Buy those 2 and swap out the actual switch module, 1 small star screw, and then it just clicks out. Takes less than a minute.
 
Thank you, I ordered the switch and modules, hopefully it'll sort out the issue :thumbsup:
it's esy to swap out a module. 1 small screw at bottom secures the module (clips in at top) then wire up the 2 switches.
 
You can do this with Hager switches too, but irritatingly not a 3g single plate switch.
Just had to rewire a circuit at home to make the intermediate somewhere else to suit this. Which was annoying but my own bad planning to blame.
 
You should get out more!
Click click2 Varilight even make a 2gang switch which is a 2way and an intermediate click3

Must be a southern thing given the suppliers you link to and at those prices I'm not surprised I have not seen them they are probably not a best seller up this way as there are a number of cheaper alternatives and I can't ever recall using contactum accessories
 

Reply to 2 Gang (1 x Intermediate 1 x 2 way) Light Switch in the Lighting Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
953
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

Lesson 1. Don’t let customer supply the accessories ;)
2
Replies
15
Views
521
brilliant thanks for your support. Lee
Replies
8
Views
587

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top