S
sparkywell
Hi all do you get such a thing as 2 gang fused switches on the 1 face plate?
2 gang lightswitch is being run off a socket circuit
2 gang lightswitch is being run off a socket circuit
Discuss 2 gang fused switches on the 1 face plate? in the Australia area at ElectriciansForums.net
Reply to 2 gang fused switches on the 1 face plate? in the Australia area at ElectriciansForums.net
News and Offers from Sponsors
- Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
- Sticky
- Article
Good to know thanks, one can never have enough places to source parts from!
- Electrical2go
- Forum Sponsor News and Offers
- 4
- 800
- Article
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
- Dan
- Forum Sponsor News and Offers
- 0
- 828
Similar threads
- Question
Double pole switches? Mounted on a grid module? Ignore the fact they have a N stamped on them.
Or is your 2 gang switch decorative, and you...
- LENNYLENNY16
- UK Electrical Forum
- 3
- 663
"It works" and "it's safe" are not necessarily the same thing. With DIY work, they are often far from the same thing.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Electrical symbolon a motorbike, Mike? It seems to indicate that these two wires are to be considored as a...
- Latest: littlespark
-
-
Thermostat ProblemMany thanks for your reply. My original question on the other board was: Hi, First post and...
- Latest: Chewy56
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.