2391 Electricity at work regs

[Andycots]

Hi all

Doing past paper and question is, "state 3 conditions that need to be met if work is carried out on or near live equipment, as identified in the EAW regs"

Had a look a EAW reg 14 and still no wiser.

Any help appreciated.

Cheers

Andy

 

[Guest123]

The 3 conditions are there....A,B & C

Work on or near live conductors

14. No person shall be engaged in any work activity on or so near any live conductor (other than one suitably covered with insulating material so as to prevent danger) that danger may arise unless–

​

(A) it is unreasonable in all the circumstances for it to be dead; and

​

(B) it is reasonable in all the circumstances for him to be at work on or near it while it is live; and

​

(C) suitable precautions (including where necessary the provision of suitable protective equipment) are taken to prevent injury

 

[Andycots]

Cheers Lenny

So the answer is the full content of a,b,c even though it is only a 3 pointer.

Andy

 

[Guest123]

Yep.

3 points for 3 points.:26: