2391 Today

[trypod]

Good Luck to all of you who are doing it today

 

[securityvillage]

Just back from college. Guess I'll be resitting in October But seriously, I dont think I did too badly. Just having second beer of the night to help get over the ordeal. It's in the lap of the Gods now (C&G)

 

[welsh spark]

ull be fine mate i sat my 2391 i&t in march and after the exam i stared thinking that id failed and going over the questions in my head. Try not to think about it stay possitive mate the wait is a pain. But worth it when you get the pass at the end. By the way what were the questins on part B mine were on a nursing home. Did they ask you to draw a labeled diagram on fault path thats allways a favourite in the exam

 

[securityvillage]

It's funny, i had revised like mad and wouldnt have had a problem with the earth path drawing on the various earthing systems, but there wasnt one. The scenario was a steel framed commercial building 3 phase. two drawings for PFC (PSSC and PEFC) Lighting circuit order of tests. Steel containment system, 5 checks to be made. I must admit I was out in an hour and a half. I answered all the questions as best I could.

 

[welsh spark]

I revised like mad and found that half the things id revised for hadnt come up its sods law i suppose its sounds like you did ok im sure youve done it mate stay possitive im moving on to the 2391 20 design course in sept and i must admit i think im going to strugle with all those calcs but we will see

 

[ktguk]

just got back from taking it everyon was saying te same, questions that we werent thought or heard of,

 

[trypod]

did you like the one about the phase rotation tester

 

[ktguk]

answer was rotating wheel device and voltage indicator (we looked in gn3 when we cam out) had me stumped for 2 types and i`m mostly an industrial spark, what about lnc lns for 60898s been working for 5 yrs andnot heard of that untill now

 

[securityvillage]

There was only one real calculation though, that was for the insulation resistance 2.13Meg ohms I hope

answer was rotating wheel device and voltage indicator (we looked in gn3 when we cam out) had me stumped for 2 types and i`m mostly an industrial spark, what about lnc lns for 60898s been working for 5 yrs andnot heard of that untill now

that was worth 6 marks!!!

 

[ktguk]

also no questions on step by step explaining tests, seems like they`ve made it harder again, although thought at end of section A i had it in the bag but sure i made a balls of it in section B

 

[securityvillage]

I revised like mad and found that half the things id revised for hadnt come up its sods law i suppose its sounds like you did ok im sure youve done it mate stay possitive im moving on to the 2391 20 design course in sept and i must admit i think im going to strugle with all those calcs but we will see

Doubt I'll do that one then. Our college struggled to do the 2391-10, couldnt get enough 17th edition candidates for it

also no questions on step by step explaining tests, seems like they`ve made it harder again, although thought at end of section A i had it in the bag but sure i made a balls of it in section B

Only time will tell. If it's a floating pass mark (dependent on how everyone else did) we may have passed

 

[ktguk]

hopefully pass mark will be lower this time as it changes on how hard it is

 

[securityvillage]

hopefully pass mark will be lower this time as it changes on how hard it is

Dont know about you but was nervous as hell when I went in. Having fourth beer now to help with getting over the whole thing.

 

[scotsparky]

well if you think the 2391-01 was hard look forward to the 2391-02 its a scream!

Hope you all pass you can relax only 6 weeks till results.