UK 63A dno fuse

[maudib0101]

years ago the dno fitted a 63A fuse but over time my needs have grown. is it a case of just getting the dno to fit a bigher fuse or are there other bits involved. meter tails are 25mm and about 0.5m long.
kind regards

 

[Deleted member 105166]

Get in touch with the DNO to see what capacity they have available

 

[Andy78]

As above get the DNO to do a site assessment and see. Very likely they can upgrade you to an 80A fuse, but they must verify first.

Do you have concerns you are using more than the fuse rating ?

 

[telectrix]

As above get the DNO to do a site assessment and see. Very likely they can upgrade you to an 80A fuse, but they must verify first.

Do you have concerns you are using more than the fuse rating ?

his cannabis plants will benefit from 80A.

 

[Andy78]

his cannabis plants will benefit from 80A.

Ah "Over time my needs have grown" I get it now.

 

[telectrix]

Ah "Over time my needs weeds have grown" I get it now.

corrected that for you.

 

[maudib0101]

thank you very much kind people i will ask the dno.
the hydroponics and lights i run off the lampost on the corner.

 

[DPG]

thank you very much kind people i will ask the dno.
the hydroponics and lights i run off the lampost on the corner.

Brill
Seriously though, how have you calculated your current requirements?

 

[BruceBanner]

Only fitting 80amps or less down here now.

 

[Zerax]

Only fitting 80amps or less down here now.

Is there an official reason for that ?