a recent development of the neon driver...

[GLENNSPARK]

here`s a new model....

 

[Andy78]

So that's what's meant by electrical separation. I get it now.

 

[Plonker 3]

About bloody time too. I am sick of snapping my neon screwdriver when loosening pozi screws.

 

[Darkwood]

Which bit do you test with?

 

[Knobhead]

You put you’re tongue on the end that’s not in the socket!

 

[Marvo]

I see it's also cunningly designed so you perform random tests by accidentally coming into contact with the uninsulated shaft whilst you're using it. It's obvious here that a lot of R&D has been put into improving the existing cornerstone of electrical test equipment and I think the end result shown above can leave no doubt that it's paid off.

 

[amo]

time to update the toolbox. going to be alot more diy electric shocks with this one. is it stated on the packaging it can be used for live testing?

 

[telectrix]

the beauty of that design is that you can fit +/- blades so that it lights up when you tighten the MCBs onto the busbar. brill.

 

[Edd]

perfect piece of kit for gas enginers to test the bonding with, almost as good as the trusty voltage stick they get given....

 

[ruston]

A top quality product , if you get away with it the first time you will be ok , because that is just going to fall to bits using it as a driver.