accenta honeywell panel cabbaged my head

[crabapple]

I normally use texecom 8 zone
1 d.c
2 hall
3 f. Reception
4 lounge
5 kitchen
6
7
8 dc

Bell box, dummy, keypad

The above is my prefered default domestic system
But a client got an accenta honeywell a bell box that needs guess work
So i did the following
1 dc
2 hall
3lounge
4 kitchen
5 dc
6
7
8

Bellbox, dummy, keyypad(not lcd)

I walk tested it
Tested alarm, siren strobe
Set entry exit times
Bell ring times
Changed codes
But cant set ..close door and make alarm go off

 

[tazz]

Can you explain better, is the alarm not going off, or not setting...?

 

[crabapple]

Tazz

Thanks for your intrest

I did not physically link out the unused zones
Aster that it took 5 mins to configure it all again

 

[tazz]

Sorry.............you have totally lost me...and most likley others...?????????????????

 

[SPARTYKUS]

Hello crabapple

are you saying its fixed now, and you forgot to link out the unused zones at first, and that is why it wouldn't set?

 

[telectrix]

have you got a zone that's pre-programmed as PA?

 

[crabapple]

I did not physically link out unused zones and could not make them work, when walk rested they were lit up. I was oblivious and ccould not arm/set alarm as 678 were lit up.

Linking them out fixed problem

 

[crabapple]

I coul then set alarm and it would also go off;bell, strobe, internal panel bell

 

[Spoon]

So it's fixed now??? The OP's head may be cabbaged but mine is now...

 

[tazz]

I presume, you don`t fit many alarms for a living....!!