Adding 2 PIR to a 2 way lighting circuit

[P666]

hello guys,

A customer has got two way lighting circuit currently switching 4 down lights in a hallway.

The customer now wants it switched by PIR.

One PIR at one side of the hallway and one PIR at the other side.

What would be a good way of doing this ?

Up for any ideas which may be better then mine.

 

[Spoon]

Does the customer want to replace the switches with PIR's?
If so then find a PIR that has a changeover switch. Wire PIR's as existing 2 switches are wired, as these are changeover switches.

 

[westward10]

Is this connected to your other thread on a similar subject.

 

[P666]

Yes

 

[westward10]

Is it exactly the same.

 

[P666]

Yes was just curious to see if anyone had any alternative ways to wire .....

 

[westward10]

Okay I am going to close this, just ask your questions on the other thread so it doesn't get confused.
Duplicate thread closed please see Adding 2 PIR’s Too a 2 way lighting circuit - https://www.electriciansforums.co.uk/threads/adding-2-pirs-too-a-2-way-lighting-circuit.169906/