Addition to circuit not up to bs7671 | on ElectriciansForums

Discuss Addition to circuit not up to bs7671 in the UK Electrical Forum area at ElectriciansForums.net

B

brizospark

Where do I stand with this one?

Got sent to a job today to install an extractor fan in a domestic bathroom for a letting agency

When I got to the property I knew it was going to be an awkward one. My plan was to take a three core from the ceiling rose in the bathroom to a fan isolator switch, hoping that the lights were going to be wired loop in live. However first thing I done was have a look at the ceiling - concrete! Gaffer said just use mini trunking along the ceiling which I really wasn't keen on rough as a badgers. Problem two - unscrewed ceiling rose only switched live there plus no cpc at light. Problem three - old rewireable bs3036 fuses at consumer unit no RCD protection and i will need RCD for circuit in bathroom. Gaffer then says I will have to run mini trunking from fuse board to bathroom, opposite ends of house- what a nightmare!!! Looks like I'm going to be doing it this way tomorrow it ain't gonna be pretty
 
I dont get what your asking .... you are aware of the regs if you require to add a fan to the lighting then it will have to comply with the 17th ..... is it not possible to utilise a old Imm' point or FCU off the socket circuit via a rcd unit... and re-do the bathroom lighting / new fan... you say concrete ceiling ...exactly how are the previous existing wiring been run?
 
I know its dog rough, However if you gaffer is asking for it done this way then what argument have you got? (Assuming he is on the job with you) I have had this before on a pig off a job and when the gaffer came back we realsised how shabby his idear it was he back tracked and claimed he said nothing of the sort.. The days of having a boss....
 
Definately needs the RCD then, and perhaps a new CPCbeing run.
Using an RCD FCU would not comply, as the requirement is to provide the RCD protection for the circuit, not just for a part of the circuit
This is to prevent fault currents upstream from the RCD due to faults in the wiring or equipment connected to the circuit from by passing the RCD and entering the location.
 
Have a chat with letting agent and suggest inch batten and underboard on ceiling, try see outside the box when trying to work out a job you can always involve other trades if it makes for a pro' finished job.
 

Reply to Addition to circuit not up to bs7671 in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
293
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
802
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
834

Similar threads

  • Question
It would normally be the outer terminals where the flex of the pendant drop connect.
Replies
3
Views
1K
  • Question
I recommend the Manrose Humidistat timer: Humidity Sensors for fans -...
Replies
1
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top