Advice please

[sam90]

Hi all I'm currently a class 1 HGV driver doing my level 2 and 3 and 18th edition when it's released I'm doing the qualifications on the weekend sat and Sunday anyway I've got a job interview to become an electricians mate in a couple of weeks the blokes a domestic and commercial installer and I want to be armed with as much knowledge as possible as I know getting the job will give me so much experience I've been honest about my experience level but still want to impress so if you lovely lot could arm me with as much useful info as possible I don't want to sound like I only know what I've done at college and that I've done some research things I'm thinking are

Usual MMsq T+E cable used for lighting circuits and ring circuit ?

Usual MCB and RCD used for hobs lights and ring circuit ?

Any wiring techniques used in new builds such as strippers for 2 way lighting circuits ect..

Anything that you guys think will be beneficial for me to know or go and research before the interview..

Thank you all ..

 

[Spoon]

Best thing you can do is have a read of some of the domestic thread on here.. There is loads of info.

 

[hightower]

Or, you know, with a potential career change around the corner I'm sure you could stretch to investing a few quid and a couple hours in a book or two? Wiring and lighting by Chris Kitcher and Part P Doctor by Alan Lynch will help to set things in your mind a little.

 

[sam90]

Or, you know, with a potential career change around the corner I'm sure you could stretch to investing a few quid and a couple hours in a book or two? Wiring and lighting by Chris Kitcher and Part P Doctor by Alan Lynch will help to set things in your mind a little.

Will definitely look at these thank you

 

[sam90]

Best thing you can do is have a read of some of the domestic thread on here.. There is loads of info.

Will do thank you

 

[JAWS]

I cant see the problem coming across with only what you have learned at college.
I personally wouldnt go into it with him thinking you're more armed then you are in case you get caught out.
My motto is be truthful then you're less likely to mess up.

 

[sam90]

Or, you know, with a potential career change around the corner I'm sure you could stretch to investing a few quid and a couple hours in a book or two? Wiring and lighting by Chris Kitcher and Part P Doctor by Alan Lynch will help to set things in your mind a little.

Ordered wiring and lighting book by Chris going to have a look the the part p book now thank you

 

[DPG]

Top tip - don't read the books while you are driving the wagon, otherwise you'll have to put your coffee and breakfast down

 

[davesparks]

Don’t try to pretend that you know more than you do.
As you progress through your new career you’ll soon realise that mcb and cable size are calculated to suit the job rather than following a fixed size.

 

[sam90]

Don’t try to pretend that you know more than you do.
As you progress through your new career you’ll soon realise that mcb and cable size are calculated to suit the job rather than following a fixed size.

I understand that I have no intention of "blagging" it but at the same time I would like to learn as much practical knowledge as possible before the interview if that makes sense

 

[Pete999]

Or, you know, with a potential career change around the corner I'm sure you could stretch to investing a few quid and a couple hours in a book or two? Wiring and lighting by Chris Kitcher and Part P Doctor by Alan Lynch will help to set things in your mind a little.

 

[Pete999]

You won't learn any practical knowledge Sam just by asking questions, it comes from experience an knowledge, you may blag the interview and get taken on as an Electricians Mate, but what will happen when you get told to do something you have very little knowledge of, other than asking a few questions on a Forum. There is more to deciding which cable or OCPD to use, it takes time, training and hands on to learn even the basics of electrical installation work, not something you can just pick up, as you muddle along, sorry for my blunt reply, but it irks me now end when Guys think its easy, do some courses and then come back and see how you feel about it then, in the mean time good luck with whatever you choose to do.

 

[littlespark]

I know it was mentioned in the (now closed) duplicate thread, but I couldn't resist.

"Strippers" for 2 way lights?

 

[Spoon]

Check out YouTube as well. Nice info on there like below.

 

[sam90]

I know it was mentioned in the (now closed) duplicate thread, but I couldn't resist.

"Strippers" for 2 way lights?

That's auto correct I'm sure most people's phones will change strapper to stripper