I have posted this in the Qualifications forum but nobody was answering and I need some info for my retest on 2365 Level 3 fault finding practical (303) before next week.
My question is not on the online test, I have already done this.
I failed this test the first time round as I got caught on finding the faults on the accessories from a fused spur on a ring final circuit . This test is on the test rig Level 3.
Through Continuity and insulation resistance I found the normal faults but failed to find the others. when it came to the accessories on the spurs, I had spent 2 hours beforehand with the instructor and he never gave us any clue about the accessories. There were 6 scenarios but four of them were on the spurs on the ring, I am told all accessories are tested the same but looking through Guidance Note 3, I cannot locate that part and my retest is coming up quick so I am a bit desperate for info.
Has anyone done this exam and could offer advise?
Could anyone point me to a link on YouTube or even offer advise where I should improve?
Thank you.
Gracey
Reading, Berks.
My question is not on the online test, I have already done this.
I failed this test the first time round as I got caught on finding the faults on the accessories from a fused spur on a ring final circuit . This test is on the test rig Level 3.
Through Continuity and insulation resistance I found the normal faults but failed to find the others. when it came to the accessories on the spurs, I had spent 2 hours beforehand with the instructor and he never gave us any clue about the accessories. There were 6 scenarios but four of them were on the spurs on the ring, I am told all accessories are tested the same but looking through Guidance Note 3, I cannot locate that part and my retest is coming up quick so I am a bit desperate for info.
Has anyone done this exam and could offer advise?
Could anyone point me to a link on YouTube or even offer advise where I should improve?
Thank you.
Gracey
Reading, Berks.
