Anyone got a lid for a 14 module Steeple board?

[DJAndy]

Before I tell a landlord that their CU needs replacing due to a snapped screw recess (that's how I found it but I know I'm going to be blamed for this), does anyone have a lid for a 14 module Steeple CU (rebranded GE E series)?

I thought about Araldite but I can't convince myself that is acceptable.

 

[pc1966]

Is it the current mode like this:

CGD CGD-MX16M | CGD QFS-MX16M 14 Way Metal Clad Consumer Unit with 100A Isolator Incomer | Denmans

Get CGD QFS-MX16M 14 Way Metal Clad Consumer Unit with 100A Isolator Incomer at wholesale prices at Denmans - your electrical distributor. Join Now!

www.denmans.co.uk

 

[DJAndy]

Is it the current mode like this:

CGD CGD-MX16M | CGD QFS-MX16M 14 Way Metal Clad Consumer Unit with 100A Isolator Incomer | Denmans

Get CGD QFS-MX16M 14 Way Metal Clad Consumer Unit with 100A Isolator Incomer at wholesale prices at Denmans - your electrical distributor. Join Now!

www.denmans.co.uk

Much older. It's like this one 19034-f57500c0463f7ae8de939313f4421017.jpg

 

[telectrix]

pic is size of a postage stamp. can't you fix with maybe a washer and glue? as long as it's secure.

 

[DJAndy]

pic is size of a postage stamp. can't you fix with maybe a washer and glue? as long as it's secure.

I thought I'd edited the post to link to the thread the image is a thumbnail on. Second attempt...

Does anyone know where to get RCBO's for this... Steeple? | on ElectriciansForums

Find Does anyone know where to get RCBO's for this... Steeple? Advice and Help. How-to Does anyone know where to get RCBO's for this... Steeple? in the UK Electrical Forum advice boards on ElectriciansForums.net | Free Electrical Advice - Electricians Forums: Electricians' Talk...

www.electriciansforums.net

I can go down the washer & glue route, this was actually my first thought - I'd managed to convince myself that this wasn't acceptable.

 

[telectrix]

find a reg that prohibits it then , as long as IP rating is compliant, the whole lid could be fixed on with tape,

 

[pc1966]

As long as IP maintained and it can be opened for maintenance then I don't see any problem with a glued-on washer being used.

Glue on washers both for both fixings if you want it to look more intentional!

 

[telectrix]

and big screw heads to hang a mask on it. don't want it catching covid.

 

[DJAndy]

Thanks all, glue washer covid mask and supersize condoms it is then

 

[telectrix]

supersize condoms it is then

bragging again? ?

 

[DJAndy]

supersize condoms it is then

bragging again? ?

The normal ones only fit over 6 module boards

 

[telectrix]

The normal ones only fit over 6 module boards

touche

 

[HappyHippyDad]

Thanks all, glue washer covid mask and supersize condoms it is then

Hi Andy,

Just checked the shed where I keep all my removed CU's. Is this the one you need? Just counted and it's a 14 module. Looks like it's not broken anywhere, bit dusty though, been there for years! No charge, let me know.

 

[telectrix]

Hi Andy,

Just checked the shed where I keep all my removed CU's. Is this the one you need? Just counted and it's a 14 module. Looks like it's not broken anywhere, bit dusty though, been there for years! No charge, let me know.
View attachment 64866

you bloody hoarder, you. thought i was bad. ??

 

[HappyHippyDad]

you bloody hoarder, you. thought i was bad. ??

It's you that started me off on giving things away, when you sent me the crabtree RCCB for free ?