Asbestos Advice | on ElectriciansForums

Discuss Asbestos Advice in the UK Electrical Forum area at ElectriciansForums.net

Joined
May 22, 2013
Messages
300
Reaction score
44
Location
Wales
Hi all

Need a bit of advice regarding asbestos. (please no comments regarding don't touch it)
Im doing my course next week to allow me to disturb it but need to quote for a job by Monday.


Got a chimney containing asbestos cermet. Said chimney is rendered and painted, but the paint has started to peal off and the floor is covered in said paint.

Is it likely that this paint is contaminated with asbestos and therefore requires an asbestos deep clean?
 
You would need to explain how the asbestos cement has been used to construct the chimney, i.e. is it on the outside covered by the flaking paint? If the Asbestos fibres are released and inhaled, it can prove fatal. Only way to tell is have the source tested. Personally, if someone told me it was asbestos, I wouldn't' touch the project until they have it removed safely & properly.
 
Thanks for your reply.

The report I have only states: Chimney positive sample for asbestos cermet

There is a picture of the chimney as well but no details about if it is the render or joining cermet.


I will air on the side of caution and treat as contaminated.


In regards to staying well clear of this project until all the asbestos is removed - this is not possible as the whole building would have to be knocked down and built again from scratch.

As a result I have had to undertake the Asbestos course Level 1 and now booked onto the Level 2.
Total cost of both courses in around ÂŁ300 per person and there's 2 of us.

With this course we are able to drill, remove non-licences asbestos and undertake any non-licences asbestos work
 
Well if you've done the appropriate course, you could probably advise us. Just wonder what else is lurking in the property. Suppose they have all the appropriate risks assessed and locations etc, and in their CDM 2015 plan?
 

Reply to Asbestos Advice in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
351
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
899
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top