Best gland options

[gazdkw82]

New induction motor turned up at work today.

The entry options are now 20mm and 45mm.

The previous motor was wired in 5 core, 6mm S/Y, through a 32mm compression gland.

I would prefer to make the S/Y off with a proper cxt gland.

A cxt32 is the size I will need. I am not sure what size the body of the gland will be and how it will make off into the 45mm threaded cut out.

Would a reducer be the best option to suit the gland?

 

[Strima]

I'd just go with a reducer, cheap enough.

 

[James]

32 to 45 reducer, easy peasy fix

 

[gazdkw82]

Thought as much. Ta

 

[ipf]

32 to 45 reducer, easy peasy fix

That's an increaser........wink!

 

[pirate]

and I thought I was the only pedant on here!

 

[Pete999]

and I thought I was the only pedant on here!

You aint taken any notice of my posts about "ring mains" then Mate LOL

 

[pirate]

Fair point, Pete!

 

[loz2754]

and I thought I was the only pedant on here!

Actually I'm a closet pedant, lurking in my closet, being too much in awe of the long standing super pedants on here to actually dare to come out...

 

[telectrix]

i used to be pedantic. now i'm perfect.

 

[Ziggie]

i used to be pedantic. now i'm perfect.

Only fault modesty - and your getting that fixed next week . My only fault is my ambitions exceed my capabilities.

 

[Mike Johnson]

Been like that for a few years now.

 

[Ziggie]

Been like that for a few years

Been like that for a few years now.

Suppose that it’s a wall dog

 

[Mike Johnson]

Your head is obviously on 90 degrees out of its correct position, that's a "Floor Dog"

When are we going to get the smilies back?

 

[gazdkw82]

Any care to provide a link to a 45mm to 32mm and also a 45mm lock ring.

Edmo's dont do them. Cant find them online either