J
jmtisme
Can anyone recommend any good books on 3 phase motors
-
Please checkout our new DIY Forum, and any trade that'd like to join and help out, and Contractor Talk Forum.
Discuss Books on 3 phase motors in the Electrician Talk | All Countries area at ElectriciansForums.net
OP
jmtisme
yes but would like a recomendation. 
OP
Knobhead
In the 60’s & 70’s Brook Crompton used to issue a small pocket book to industrial apprentices. It was always referred to as the little red bible.
If you can find a retired electrician and ply him with a few drinks you may get him to part with his copy. NO you can’t have mine! It covered installation, maintenance and faults. OK no fancy electronic stuff but good basic information.
In the mid 90’s I moved to a new company. The apprentice asked me a question for his homework. I just sent him to the managers office and told him to ask if the manager had a copy of the bible, he goes off giving me funny looks. Comes back holding a little red book and the answer to his question. Not ½ hour later the managers there wanting his book back!
If you can find a retired electrician and ply him with a few drinks you may get him to part with his copy. NO you can’t have mine! It covered installation, maintenance and faults. OK no fancy electronic stuff but good basic information.
In the mid 90’s I moved to a new company. The apprentice asked me a question for his homework. I just sent him to the managers office and told him to ask if the manager had a copy of the bible, he goes off giving me funny looks. Comes back holding a little red book and the answer to his question. Not ½ hour later the managers there wanting his book back!
OP
pmac10
electric motors and drives, austin hughs, isbn 0-7506-4718-3
OP
Guest123
As an Amazon Associate Electricians Forums may earn a small commission from qualifying purchases.
OP
pmac10
yes lenny, that one
OP
silva.foxx
Enter 'Electric motors drives' into torrentreactor.net then go via fileindexer.
Reply to Books on 3 phase motors in the Electrician Talk | All Countries area at ElectriciansForums.net
Similar Threads
Hi James,
At the inverter end the multi strand is ferruled and torqued in the terminal and at the motor end they are the “wago type” push fitting...
- Blikzoggy
- UK Electrical Forum
- 2
- 306
I have since found the 3rd edition of the art of electronics in pdf online.
Won't link to it of course, but it's out there.
There are many...
- Question
No idea on the longevity but change the links to delta in the motor and use the below.
Link the run command in so as soon as it has power it will...
- stokielee
- UK Electrical Forum
- 5
- 1K
Hi All,
I have recently purchased a motor soft starter from aliexpress for a 3 phase motor
Before connecting load I measured the input and...
- Question
That looks like a Metrel display (I have one), they have a permanent 3 wire display that measures the three combinations so I would say that’s a...
- AngelLaHash
- UK Electrical Forum
- 5
- 645
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Song words.ROCK Me Tonight - Freddie Jackson View: https://youtu.be/R8HjwlUWuLU?si=FHs6gnK2tZCR8qQq- Latest: westward10
-
What pets do you have, and what pets have you had?June last year I mentioned on this thread that we had lost one of our two rabbits…. Number two...- Latest: littlespark
-
2 x t&e for 3 phase isolatorYes both are definitely 6mm t&e, one of them has a darker grey outer insulation than the other...
- Latest: kev.k
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.