Burnt out water heater switch | Page 2 | on ElectriciansForums

Discuss Burnt out water heater switch in the UK Electrical Forum area at ElectriciansForums.net

Joined
Mar 5, 2019
Messages
4
Reaction score
1
Location
Reading
Hi all, just joined EF hoping to solve a problem. I live in a 3 year old flat in a block and my immersion heater stopped working. I have discovered the problem to be a burnt out switch (photo attached). As you can see it's pretty bad to the extent that the plastic has melted. My question is why should this happen, especially in a modern property? Cheers, Dave
[ElectriciansForums.net] Burnt out water heater switch
 
You want to check a few of the other accessories for loose terminals and/or unearthed metal backboxes.

You wont get much comeback with the NHBC 10 year warranty, I'm afraid, but finding and rectifying any faults would make the property safer.

Average 3kW immersion/ 230v supply (nearer 240v in reality) gives you 12.5 to over 13Amps running current. The fuse was never going to last long.
Agree that it should have been a double pole switch without a fuse.
 
TI should say that I bought the property brand spanking new from one of the biggest developers in the country!
They tend to be the worst offenders for using cheap accessories, a few pence saved on a switch in your house turns into thousands saved on a large estate.

Also it is recommended that domestic properties get a periodic inspection every ten years to ensure the installation is still safe to use, not essential or the law but worthwhile.
 
Haha, get the point;) but nevertheless a 3 yr old property - this could have been a lot more serious than no hot water for a while! So basically can we say that stranded wire, folded over, (un-ferruled), tightened securely in a 13A D/P switch should be ok?

Get on to the to the sellers to sort that out .
It could have been a lot more serious .
Do not fix it yourself or you may jeopardise any future claims.
 
I have made my views known on "new builds" on here many times...

so, no rant tonight...but you have seen some very good advice here OP!
but would you buy a new build ship with radar, sat nav., ekectrickery, etc. or do you prefer something like the Mary Rose?
 

Reply to Burnt out water heater switch in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
953
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Article
This is an RSS feed of thread: Leaking cylinder around immersion heater Content of the thread: Hi. My hot water cylinder has a small leak. It's...
Replies
0
Views
229
Yet another update: I believe what EDF have done is moved me from an Economy 9 to an Economy 7. I've just emailed them to ask if they can switch...
Replies
2
Views
267

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top