Circuit breakers short circuit ratings

[Bradzz]

Hi im looking for a list of Circuit Breaker short circuit capacity ratings, that i can stick into my BGB.
list required would be for all fuse types, from BS 3036 to BS88. old and new types protective devices.

Also is there such a thing as fuse wire sizes gauge card? if so can some one point me in the direction of obtaining one.

Cheers people.

 

[Octopus]

Theres a post (sticky possibly) on here so do a search or two and see what you find.

 

[Bradzz]

Theres a post (sticky possibly) on here so do a search or two and see what you find.

Cheers Murdoch, i have had a good look but, still unable to locate one. I found one for BSEN 60898 breakers but its short, im looking for the range of protective devices.

 

[MarkieSparkie]

Check out the link to the threads below:
http://www.electriciansforums.net/i...installations/18439-circuit-breaker-info.html
http://www.electriciansforums.net/i...al-installations/30672-zs-swa-csa-tables.html

 

[MarkieSparkie]

BS7671:1992+A1:1994+A2:1997 533-01-04 A fuse shall preferably be of the cartridge type. Where a semi-enclosed fuse is selected, it shall be fitted with an element in accordance with the manufacturer's instructions if any. In the absence of such instructions, it shall be fitted with a single element of tinned copper wire of the appropriate diameter specified in Table 53 A.
TABLE 53A Sizes of tinned copper wire for use in semi-enclosed fuses

Nominal current of fuse element (A)	Nominal diameter of wire (mm)
3	0.15
5	0.2
10	0.35
15	0.5
20	0.6
25	0.75
30	0.85
45	1.25
60	1.53
80	1.8
100	2.0

 

[telectrix]

BS7671:1992+A1:1994+A2:1997 533-01-04 A fuse shall preferably be of the cartridge type. Where a semi-enclosed fuse is selected, it shall be fitted with an element in accordance with the manufacturer's instructions if any. In the absence of such instructions, it shall be fitted with a single element of tinned copper wire of the appropriate diameter specified in Table 53 A.
TABLE 53A Sizes of tinned copper wire for use in semi-enclosed fuses

Nominal current of fuse element (A)	Nominal diameter of wire (mm)
3	0.15
5	0.2
10	0.35
15	0.5
20	0.6
25	0.75
30	0.85
45	1.25
60	1.53
80	1.8
100	2.0

well, that's buggered me up. my micrometer measures in thous' of an inch.can't do with these millionmetres

forum msays that's less than 6 characters. wish i could count like that.

 

[Bradzz]

Cheers MarkieSparkie, i have this Table, what im looking for is the rating, E.g. 1361 100A type II = 33KA .
But i require the total list for all protective fuses/Breakers.

Cheers people for the reponses.

 

[MarkieSparkie]

Have you got OSG+A1:2011 Tables 7.2.7(i) and (ii)?

 

[Bradzz]

Hi MarkieSparkie, I found something, sort of what im looking for it was in GN3 page 60, of the 2002 addition, but to all thanks for the HELP!!!!, lol