College work ?

[Lee Kerr]

Hey Guys
im a 3rd year apprentice struggling with my college work anyone got a clue in this question
HELP ME! please

A coil of resistance 4ohms is connected across a shunt of resistance 0.005ohms if the current in the main circuit is 50a what is the current of the coil ? :sick:

 

[R32]

Hey buddy, is that all that the question stated? No applied voltage or anything you've left out?

 

[mechelec]

are you sure the coil is shunted by a 0.005 ohm resistor

 

[kenny james]

try and find the answer yourself without asking!, you cannot take us in with you on your next exam, if you get it wrong no doubt the tutor will take you through it to explain the correct answer if you get it right a pat on your back.

 

[trev]

Post up what you think is the answer mate. I'd put money on it then being discussed in detail

 

[Bobster]

Re-type how the question was given to you word for word.

For a third year question I wouldn't see them giving you that question without an applied voltage.

 

[Knobhead]

49.9375A
Now work out how I did it.
It is "Homework"

 

[MarkieSparkie]

Current though 4 Ohm Coil = 62.4mA (rounded to 1 DP)

 

[Knobhead]

Ooopps as usual I misread the question! But Markie made me rethink, I was 0.00008A out in my original answer.
So the current for the 4 Ώ coil would be 62.421973mA.

So OK Markie and I agree on 62.42mA, but will we tell which way we did it? And I’ll be honest I used two methods because someone set seeds of doubt in my mind.

 

[Knobhead]

Eeerr Markie, we’re both wrong, decimal point in wrong place!

6.242mA!

 

[telectrix]

6.242mA here also

 

[telectrix]

6.242mA here also. a simple ratio calculation.

 

[Des 56]

The numbers are easy,its that damn decimal point that likes to take the P

 

[mechelec]

someone put me out of my misery, I get 62.422mA where am I going wrong?? (apart from sitting on here pondering problems that I dont need to ponder)

 

[Knobhead]

Move the decimal point and you've got the same answer. mili = 1/1000

I notice we’ve had no response from our OP