Connection earth cable to banjo

[devonspark]

Hi

Could anyone advise on the best way to connect 16mm earth cable to the banjo ring of a 25 sized gland for swa.

 

[Deleted member 9648]

Lug cable and bolt through banjo and enclosure.

 

[bugsy]

Job done

 

[chris gray]

with double nutted roofer
16mm seems big

 

[pennywise]

I like using gutter bolts with the lug sandwiched between two washers then a spring washer then the nut .

 

[chris gray]

i always use 2 nuts

 

[pennywise]

If I were being really ---- I would put a dome nut on top, but as you say two will suffice

 

[Deleted member 9648]

Far too many nuts in this thread

 

[rocker]

You just jam it in the strings.

 

[Bromd123]

You just jam it in the strings.

And i bet your wife said you would never use that banjo lol

 

[rocker]

'It's for work' I tells 'er!

 

[Bromd123]

'It's for work' I tells 'er!

LOL i will have to try that one all i ever get is "you'll never use it, it will be stuck in a corner"

 

[dixon9]

You just jam it in the strings.

(Bit of George Fornby on the side then?!)

 

[benji]

If your going to do it correctly you will use cable lug with 1xbrass bolt/setscrew 2xbrass washers 1xbrass nut &1xbrass locking nut ,you could use sheradized /yellow passivated but brass is easyer to get hold of.
Once had to go to a job to remove all roofing bolts from banjo,s (100,s of them)because insurance company stated it was technically not acceptable ie dissimilar metals

yours benji