contactor wiring | on ElectriciansForums

Discuss contactor wiring in the Australia area at ElectriciansForums.net

K

knackfuss

Looking for a drawing how to wire a switch to bring in a contator to control a shop with 7 lighting circuits .contactor will be a hagar type...
 
Supply the switch/coil circuit from a suitable separate fuse/mcb way at 5-6a and wire in 1.5mm to your switch,switch return will energise contactor coil.Use a 230v contactor...switch return to A1.....neutral to A2. Presumably your contactor will supply a DB feeding your seven lighting circuits.
 

Reply to contactor wiring in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
317
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
842
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
965

Similar threads

It could be a slave switch where you would have a L in and a common wire out to a master switch.
Replies
3
Views
590
Yellow seems to be a “signal” wire according to the instructions, which can be used in conjunction with another switch. These are usually extra...
Replies
1
Views
859

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top